Kent · England
Shallow-mount security bollard installation in Folkestone
Shallow-mount bollards for sites across Folkestone and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageFolkestone shallow-mount bollards
Shallow-mount bollards suit plenty of Folkestone sites, high street shopfronts, schools and community car parks among them. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We cover Folkestone's CT20, CT19 and CT18 postcode districts, including places such as Hawkinge, Capel-le-Ferne, Lyminge and Densole. We also cover neighbouring Dover (7 miles), Ashford, Kent (13.5 miles), Deal (14.1 miles) and Canterbury (14.2 miles) — distances are straight-line.
Local details
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Folkestone and Hythe
- Postcodes
- CT20, CT19 and CT18
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
- Nearby
- Dover (7 mi), Ashford, Kent (13.5 mi), Deal (14.1 mi), Canterbury (14.2 mi)
Where shallow-mount bollards go in around Folkestone
Common uses in a place like Folkestone:
- Lines that must cross over shallow drainage or ducts
- Sites where service diversions would be slow or impractical
- Retrofits outside occupied buildings with tight programmes
What shallow-mount bollards cost in Folkestone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Folkestone
The highway authority for local roads in Folkestone is Kent County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Folkestone and Hythe) first — we flag this at survey.
Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job. The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
What happens on site
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Specification choices
| Option | Detail |
|---|---|
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
What affects the quote
Our South East guide prices are a starting point; the survey in Folkestone firms them up. What tends to move them:
- Changes of direction, end details and removable positions
- Lifting, storing and relaying natural stone paving
- Amount of hand digging needed around live services
Keeping them working
Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
If posts in Folkestone are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Folkestone do you cover for shallow-mount bollards?
We cover all of Folkestone (CT20, CT19 and CT18) and the rest of Kent. We also work in Dover, Ashford, Kent and Deal.
Do I need consent for shallow-mount bollards on a public footway in Folkestone?
In Folkestone, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do shallow-mount bollards cost in Folkestone?
In Folkestone, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Shallow-mount bollards near Folkestone
- Dover (7 mi)
- Ashford, Kent (13.5 mi)
- Deal (14.1 mi)
- Canterbury (14.2 mi)
- Faversham (20.1 mi)
- Herne Bay (20.2 mi)