Kent · England
Shallow-mount security bollard installation in Faversham
Local installation of shallow-mount bollards in Faversham — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageFaversham shallow-mount bollards
Whether it's filling-station forecourts, community car parks and schools, shallow-mount bollards in Faversham are planned around who needs to get through and who doesn't. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We work across ME13 — Faversham itself and places including Boughton under Blean, Eastling, Painter's Forstal and Sheldwich. Nearby, we also work in Whitstable (6.7 miles), Sittingbourne (7 miles), Canterbury (8.6 miles) and Herne Bay (11.1 miles), measured as the crow flies.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Swale
- Postcodes
- ME13
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
- Nearby
- Whitstable (6.7 mi), Sittingbourne (7 mi), Canterbury (8.6 mi), Herne Bay (11.1 mi)
What Faversham sites use shallow-mount bollards for
Typical reasons Faversham sites choose shallow-mount bollards:
- Lines that must cross over shallow drainage or ducts
- Podium decks, car park roofs and basement slabs
- Sites where service diversions would be slow or impractical
Guide prices for Faversham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Faversham
The highway authority for local roads in Faversham is Kent County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Swale) first — we flag this at survey.
Utility owners may set minimum separation distances or ask to be present when digging near their apparatus. Shallow does not mean simple.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
From survey to handover
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Finishes and options
| Option | Detail |
|---|---|
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
What moves the price in Faversham
Two Faversham jobs with the same number of posts can price quite differently. The usual reasons:
- Structural engineering checks on slabs or decks
- Length of run and the system needed to achieve the rating
- Amount of hand digging needed around live services
Keeping them working
If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation. Any later utility work beside the line should be supervised so the frame is not undermined.
For damaged or loose posts in Faversham, repairs and replacements are priced in writing first.
Questions about shallow-mount bollards in Faversham
Which parts of Faversham do you cover for shallow-mount bollards?
We cover all of Faversham (ME13) and the rest of Kent. We also work in Whitstable, Sittingbourne and Canterbury.
Who gives permission for bollards on the pavement in Faversham?
The highway authority for local roads in Faversham is Kent County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Faversham?
In Faversham, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Shallow-mount bollards in nearby towns
- Whitstable (6.7 mi)
- Sittingbourne (7 mi)
- Canterbury (8.6 mi)
- Herne Bay (11.1 mi)
- Ashford, Kent (11.6 mi)
- Gillingham (15.5 mi)