Kent · England
Telescopic bollard installation in Faversham
Telescopic bollards for sites across Faversham and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageFaversham telescopic bollards
Telescopic bollards suit plenty of Faversham sites, high street shopfronts, community car parks and filling-station forecourts among them. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Faversham takes in the ME13 postcode district and nearby places like Boughton under Blean, Eastling, Painter's Forstal and Sheldwich. Jobs in Faversham can be combined with work in Whitstable (6.7 miles), Sittingbourne (7 miles), Canterbury (8.6 miles) and Herne Bay (11.1 miles) (straight-line distances).
Faversham at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Swale
- Postcodes
- ME13
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Whitstable (6.7 mi), Sittingbourne (7 mi), Canterbury (8.6 mi), Herne Bay (11.1 mi)
Faversham: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Telescopic bollards in Faversham: common uses
Typical reasons Faversham sites choose telescopic bollards:
- Car parks where a removable post would go missing
- Commercial yards where posts must not be left lying around
- Access roads closed outside working hours
What we check first in Faversham
The highway authority for local roads in Faversham is Kent County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Faversham is listed or inside a conservation area, check with the local planning authority (the council for Swale) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
What happens on site
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
Pricing telescopic bollards in Faversham
Our South East guide prices are a starting point; the survey in Faversham firms them up. What tends to move them:
- Surface type and quality of reinstatement
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Faversham, repairs and replacements are priced in writing first.
Common questions
Which parts of Faversham do you cover for telescopic bollards?
We cover all of Faversham (ME13) and the rest of Kent. We also work in Whitstable, Sittingbourne and Canterbury.
Who gives permission for bollards on the pavement in Faversham?
Kent County Council is the highway authority covering Faversham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Faversham?
In Faversham, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Telescopic bollards in nearby towns
- Whitstable (6.7 mi)
- Sittingbourne (7 mi)
- Canterbury (8.6 mi)
- Herne Bay (11.1 mi)
- Ashford, Kent (11.6 mi)
- Gillingham (15.5 mi)