Kent · England
Telescopic bollard installation in Gillingham
Telescopic bollards for sites across Gillingham and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Gillingham
From high streets, housing association car parks and retail parks, Gillingham has plenty of places where telescopic bollards earn their keep. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Gillingham takes in the ME7, ME8 and ME3 postcode districts and nearby places like Lower Twydall, Capstone, Kemsley Street and Lower Rainham. Nearby, we also work in Chatham (1.1 miles), Rochester (1.9 miles), Strood (3.1 miles) and Gravesend (8.5 miles), measured as the crow flies.
Key facts for this area
- Area
- Kent, England
- Highway authority
- Medway Council (local roads)
- Planning authority
- Medway Council
- Postcodes
- ME7, ME8 and ME3
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
What Gillingham sites use telescopic bollards for
Around Gillingham, telescopic bollards usually solve one of these:
- Allocated parking bays in flats and private developments
- Car parks where a removable post would go missing
- Shared drives that need occasional closing
Guide prices for Gillingham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Gillingham
In Gillingham, work on adopted pavements and verges needs consent from Medway Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Gillingham is listed or inside a conservation area, check with the local planning authority (Medway Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
From survey to handover
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Gillingham
When we price telescopic bollards in Gillingham, these make the biggest difference:
- Stainless or powder-coated finish
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Gillingham.
Common questions
Do you install telescopic bollards in Gillingham?
We cover all of Gillingham (ME7, ME8 and ME3) and the rest of Kent. We also work in Chatham, Rochester and Strood.
Do I need consent for telescopic bollards on a public footway in Gillingham?
The highway authority for local roads in Gillingham is Medway Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for telescopic bollards in Gillingham?
In Gillingham, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards near Gillingham
- Chatham (1.1 mi)
- Rochester (1.9 mi)
- Strood (3.1 mi)
- Gravesend (8.5 mi)
- Maidstone (8.6 mi)
- Sittingbourne (8.6 mi)