Kent · England
Timber bollard installation in Faversham
Local installation of timber bollards in Faversham — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout timber bollards in Faversham
In the town of Faversham, timber bollards tend to go in at schools, community car parks and local parades. Timber bollards deter and guide vehicles; they are not tested barriers.
We cover Faversham's ME13 postcode district, including places such as Boughton under Blean, Eastling, Painter's Forstal and Sheldwich. Nearby, we also work in Whitstable (6.7 miles), Sittingbourne (7 miles), Canterbury (8.6 miles) and Herne Bay (11.1 miles), measured as the crow flies.
Faversham at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Swale
- Postcodes
- ME13
- Guide price
- Typically £105–£365 per post + VAT (£125–£435 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Whitstable (6.7 mi), Sittingbourne (7 mi), Canterbury (8.6 mi), Herne Bay (11.1 mi)
What timber bollards cost in Faversham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £105–£215 + VAT · £125–£255 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £185–£295 + VAT · £215–£345 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £265–£365 + VAT · £315–£435 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Faversham sites use timber bollards for
Around Faversham, timber bollards usually solve one of these:
- Country parks, nature reserves and woodland car parks
- Village greens and recreation grounds
- Landscaped car parks and picnic areas
What we check first in Faversham
In Faversham, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Faversham need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Swale before posts go in.
Timber bollards usually go into soft landscape, so the ground varies more than with paved sites. Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening.
- Keep emergency vehicle access available, using a removable or hinged post where a route must open.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
How the job runs
Survey the setting
A free site survey looks at the ground, drainage, tree roots, how vehicles currently get onto the land and how the site looks. You receive a fixed written quote with species, size and fixing.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Finishes and options
| Option | Detail |
|---|---|
| Reflective bands and studs | Reflective bands, white painted tops or inset studs so posts are visible on unlit sites. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
What affects the quote
Two Faversham jobs with the same number of posts can price quite differently. The usual reasons:
- Ground conditions, roots and services
- Fixing method: stone, concrete or steel shoe
- Number of posts and length of the line
After installation
New oak can release tannin that stains nearby paving for the first season; this weathers away. Re-treat cut or damaged softwood, keep grass and soil from building up around the base, and replace posts that are soft at the ground line before they snap.
We can also service, repair or replace existing posts anywhere in Faversham.
Questions about timber bollards in Faversham
Can you install timber bollards anywhere in Faversham?
We cover all of Faversham (ME13) and the rest of Kent. We also work in Whitstable, Sittingbourne and Canterbury.
Do I need consent for timber bollards on a public footway in Faversham?
The highway authority for local roads in Faversham is Kent County Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for timber bollards in Faversham?
In Faversham, typically £105–£365 per post, supplied and installed, plus VAT (£125–£435 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Should timber posts be set in concrete?
Only with care. Concrete holds the post firmly but can trap water around it at ground level, where rot starts. A free-draining base and a concrete collar shaped to shed water help, and compacted stone backfill is often better in clay.
How long will a timber bollard last in the ground?
It depends on species, treatment and how the post is set. Dense hardwoods and oak heartwood last much longer than softwood, and posts that are kept out of standing water last longer than those sitting in wet concrete. A steel shoe that keeps timber off the ground extends life considerably.
Timber bollards in nearby towns
- Whitstable (6.7 mi)
- Sittingbourne (7 mi)
- Canterbury (8.6 mi)
- Herne Bay (11.1 mi)
- Ashford, Kent (11.6 mi)
- Gillingham (15.5 mi)