Kent · England
Telescopic bollard installation in Folkestone
Telescopic bollards for sites across Folkestone and the rest of Kent, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Folkestone
Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads. In Folkestone, that tends to mean sites such as local parades, residential driveways and schools.
We cover Folkestone's CT20, CT19 and CT18 postcode districts, including places such as Hawkinge, Capel-le-Ferne, Lyminge and Densole. Jobs in Folkestone can be combined with work in Dover (7 miles), Ashford, Kent (13.5 miles), Deal (14.1 miles) and Canterbury (14.2 miles) (straight-line distances).
Key facts for this area
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Folkestone and Hythe
- Postcodes
- CT20, CT19 and CT18
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Dover (7 mi), Ashford, Kent (13.5 mi), Deal (14.1 mi), Canterbury (14.2 mi)
Guide prices for Folkestone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Telescopic bollards in Folkestone: common uses
Typical reasons Folkestone sites choose telescopic bollards:
- Allocated parking bays in flats and private developments
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
Before we dig in Folkestone
The highway authority for local roads in Folkestone is Kent County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Folkestone is listed or inside a conservation area, check with the local planning authority (the council for Folkestone and Hythe) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Specification choices
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
When we price telescopic bollards in Folkestone, these make the biggest difference:
- Stainless or powder-coated finish
- Post size and whether lift assistance is wanted
- Number of posts and keyed-alike locks
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Folkestone, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Folkestone
Do you install telescopic bollards in Folkestone?
We cover all of Folkestone (CT20, CT19 and CT18) and the rest of Kent. We also work in Dover, Ashford, Kent and Deal.
Who gives permission for bollards on the pavement in Folkestone?
Kent County Council is the highway authority covering Folkestone's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Folkestone?
In Folkestone, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards in nearby towns
- Dover (7 mi)
- Ashford, Kent (13.5 mi)
- Deal (14.1 mi)
- Canterbury (14.2 mi)
- Faversham (20.1 mi)
- Herne Bay (20.2 mi)