Bollard Installers

England · 10 towns

Removable bollard installation in Nottinghamshire

Removable bollards for sites across Nottinghamshire: surveyed, quoted in writing and installed by our crews.

Removable black bollard lifted out and lying beside its open ground socket on a block-paved access road, key in the lockComputer-generated image

Removable bollards in Nottinghamshire

Across Nottinghamshire, typical sites for removable bollards include office forecourts, pedestrianised streets and stadium approaches. Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points.

Highway authorities for local roads in Nottinghamshire: Nottingham City Council and Nottinghamshire County Council.

Choose your town in Nottinghamshire

Guide prices in Nottinghamshire

SpecificationGuide priceIncludes
Standard£245–£485 + VAT · £285–£575 inc VATStandard post, foundation, reinstatement
Upgraded£415–£665 + VAT · £495–£795 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£595–£825 + VAT · £705–£985 inc VATHeavy-duty or architectural spec, premium finish

Per bollard with ground socket, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.

Highway and planning authorities in Nottinghamshire

TownHighway / roads authorityPlanning authority
NottinghamNottingham City CouncilNottingham City Council
MansfieldNottinghamshire County Councilthe council for Mansfield
WorksopNottinghamshire County Councilthe council for Bassetlaw
Newark-on-TrentNottinghamshire County Councilthe council for Newark and Sherwood
ArnoldNottinghamshire County Councilthe council for Gedling
West BridgfordNottinghamshire County Councilthe council for Rushcliffe
Sutton-in-AshfieldNottinghamshire County Councilthe council for Ashfield
HucknallNottinghamshire County Councilthe council for Ashfield
Kirkby-in-AshfieldNottinghamshire County Councilthe council for Ashfield
RetfordNottinghamshire County Councilthe council for Bassetlaw

Rules for removable bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Cut and excavate

A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.

Set the socket flush

The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.

Reinstate around the socket

Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.

Fit posts and hand over keys

Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.

Removable bollards in Nottinghamshire: FAQs

Do you cover all of Nottinghamshire for removable bollards?

Yes — including Nottingham, Mansfield, Worksop, Newark-on-Trent, Arnold, West Bridgford, Sutton-in-Ashfield and Hucknall. Enter your postcode in the price calculator to confirm.

How much do removable bollards cost in Nottinghamshire?

In Nottinghamshire, typically £245–£825 per bollard with ground socket, supplied and installed, plus VAT (£285–£985 including VAT for homeowners), with a minimum job of £575 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Nottinghamshire?

For local roads, Nottingham City Council and Nottinghamshire County Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Can all the bollards on our site use one key?

Yes, if the locks are ordered keyed alike. That is common on estates and car parks with several access points. Spare keys can be supplied at the same time.

Can removable bollards be installed on block paving?

Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.

Other services in Nottinghamshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote