Staffordshire · England
Removable bollard installation in Lichfield
Removable bollards supplied and fitted in Lichfield, Staffordshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageLichfield removable bollards
In the city of Lichfield, removable bollards tend to go in at community car parks, schools and small industrial units. Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points.
We work across WS13 and WS14 — Lichfield itself and places including Fradley South, Streethay, Fradley and Pipehill. Jobs in Lichfield can be combined with work in Burntwood (4.3 miles), Tamworth (6.3 miles), Aldridge (6.5 miles) and Rugeley (7.1 miles) (straight-line distances). Wolverhampton is around 14 miles away.
Key facts for this area
- Area
- Staffordshire, England
- Highway authority
- Staffordshire County Council (local roads)
- Planning authority
- the council for Lichfield
- Postcodes
- WS13 and WS14
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
Guide prices for Lichfield
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Lichfield sites use removable bollards for
Typical reasons Lichfield sites choose removable bollards:
- Temporary event closures and market streets
- Driveways and private parking bays
- School gates closed during drop-off and pick-up
Permissions and groundwork in Lichfield
In Lichfield, work on adopted pavements and verges needs consent from Staffordshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Lichfield) first — we flag this at survey.
The base sits on free-draining stone or connects to a drainage route, so rainwater does not stand in the socket and freeze around the post in winter. Removable bollards need modest depth, which makes them one of the easier bollards to fit around services.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
How the job runs
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
What affects the quote
Two Lichfield jobs with the same number of posts can price quite differently. The usual reasons:
- Lock type and whether locks are keyed alike
- Drainage at the socket base
- Rated removable posts where security is required
After installation
Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close. Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out.
We can also service, repair or replace existing posts anywhere in Lichfield.
Questions about removable bollards in Lichfield
Can you install removable bollards anywhere in Lichfield?
We cover all of Lichfield (WS13 and WS14) and the rest of Staffordshire. We also work in Burntwood, Tamworth and Aldridge.
Do I need consent for removable bollards on a public footway in Lichfield?
In Lichfield, work on adopted pavements and verges needs consent from Staffordshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do removable bollards cost in Lichfield?
In Lichfield, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Removable bollards near Lichfield
- Burntwood (4.3 mi)
- Tamworth (6.3 mi)
- Aldridge (6.5 mi)
- Rugeley (7.1 mi)
- Sutton Coldfield (7.9 mi)
- Cannock (8.6 mi)