Bollard Installers

England · 18 towns

Removable bollard installation in West Yorkshire

Removable bollards for sites across West Yorkshire: surveyed, quoted in writing and installed by our crews.

Removable black bollard lifted out and lying beside its open ground socket on a block-paved access road, key in the lockComputer-generated image

Removable bollards in West Yorkshire

Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points. We cover West Yorkshire — Leeds, Bradford, Huddersfield, Wakefield and Halifax and more.

Highway authorities for local roads in West Yorkshire: Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council.

Choose your town in West Yorkshire

Guide prices in West Yorkshire

SpecificationGuide priceIncludes
Standard£235–£485 + VAT · £275–£575 inc VATStandard post, foundation, reinstatement
Upgraded£415–£655 + VAT · £495–£785 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£585–£815 + VAT · £695–£975 inc VATHeavy-duty or architectural spec, premium finish

Per bollard with ground socket, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.

Local authorities across West Yorkshire

TownHighway / roads authorityPlanning authority
LeedsLeeds City CouncilLeeds City Council
BradfordBradford CouncilBradford Council
HuddersfieldKirklees CouncilKirklees Council
WakefieldWakefield CouncilWakefield Council
HalifaxCalderdale CouncilCalderdale Council
DewsburyKirklees CouncilKirklees Council
MorleyLeeds City CouncilLeeds City Council
KeighleyBradford CouncilBradford Council
CastlefordWakefield CouncilWakefield Council
PontefractWakefield CouncilWakefield Council
BatleyKirklees CouncilKirklees Council
YeadonLeeds City CouncilLeeds City Council
BrighouseCalderdale CouncilCalderdale Council
ShipleyBradford CouncilBradford Council
CleckheatonKirklees CouncilKirklees Council
PudseyLeeds City CouncilLeeds City Council
OssettWakefield CouncilWakefield Council
GuiseleyLeeds City CouncilLeeds City Council

Rules for removable bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Agree who will lift the post

At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.

Cut and excavate

A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.

Reinstate around the socket

Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.

Fit posts and hand over keys

Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.

Removable bollards in West Yorkshire: FAQs

Do you cover all of West Yorkshire for removable bollards?

Yes — including Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley and Keighley. Enter your postcode in the price calculator to confirm.

How much do removable bollards cost in West Yorkshire?

In West Yorkshire, typically £235–£815 per bollard with ground socket, supplied and installed, plus VAT (£275–£975 including VAT for homeowners), with a minimum job of £575 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in West Yorkshire?

For local roads, Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Can removable bollards be installed on block paving?

Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.

How heavy is a removable bollard to lift?

It depends on material and size; a slim aluminium post is easy to lift, while a large concrete-filled steel post is not designed for daily handling. If the post will come out every day, say so at the survey and we will suggest something lighter with a handle.

Other services in West Yorkshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote