Bollard Installers

England · 18 towns

Semi-automatic bollard installation in West Yorkshire

Semi-automatic bollards for sites across West Yorkshire: surveyed, quoted in writing and installed by our crews.

Galvanised semi-automatic rising bollard raised in the entrance to a small business car parkComputer-generated image

Semi-automatic bollards in West Yorkshire

Across West Yorkshire, typical sites for semi-automatic bollards include multi-storey car parks, office forecourts and university campuses. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.

Highway authorities for local roads in West Yorkshire: Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council.

Choose your town in West Yorkshire

Guide prices in West Yorkshire

SpecificationGuide priceIncludes
Standard£1,045–£2,045 + VAT · £1,245–£2,445 inc VATStandard post, foundation, reinstatement
Upgraded£1,745–£2,745 + VAT · £2,095–£3,295 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£2,445–£3,395 + VAT · £2,945–£4,045 inc VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.

Local authorities across West Yorkshire

TownHighway / roads authorityPlanning authority
LeedsLeeds City CouncilLeeds City Council
BradfordBradford CouncilBradford Council
HuddersfieldKirklees CouncilKirklees Council
WakefieldWakefield CouncilWakefield Council
HalifaxCalderdale CouncilCalderdale Council
DewsburyKirklees CouncilKirklees Council
MorleyLeeds City CouncilLeeds City Council
KeighleyBradford CouncilBradford Council
CastlefordWakefield CouncilWakefield Council
PontefractWakefield CouncilWakefield Council
BatleyKirklees CouncilKirklees Council
YeadonLeeds City CouncilLeeds City Council
BrighouseCalderdale CouncilCalderdale Council
ShipleyBradford CouncilBradford Council
CleckheatonKirklees CouncilKirklees Council
PudseyLeeds City CouncilLeeds City Council
OssettWakefield CouncilWakefield Council
GuiseleyLeeds City CouncilLeeds City Council

Rules for semi-automatic bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Excavate the pit

The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.

Set the cassette

The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.

Reinstate the surface

Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.

Test and show users

The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.

Semi-automatic bollards in West Yorkshire: FAQs

Do you cover all of West Yorkshire for semi-automatic bollards?

Yes — including Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley and Keighley. Enter your postcode in the price calculator to confirm.

How much do semi-automatic bollards cost in West Yorkshire?

In West Yorkshire, typically £1,045–£3,395 per bollard, supplied and installed, plus VAT (£1,245–£4,045 including VAT for homeowners), with a minimum job of £1,145 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in West Yorkshire?

For local roads, Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Do semi-automatic bollards suit domestic driveways?

Yes, if the owner wants less lifting than a telescopic post. The same depth and drainage checks apply. Domestic models are lighter duty than commercial ones.

Can a semi-automatic bollard injure someone as it rises?

It rises with some force, so nobody should stand over it or put a hand on the head when releasing it. Users should be shown how to operate it safely. On busy sites, a sign and reflective bands help.

Other services in West Yorkshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote