Wales · 3 towns
Semi-automatic bollard installation in Blaenau Gwent
Semi-automatic bollards for sites across Blaenau Gwent: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Blaenau Gwent
Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed. We cover Blaenau Gwent — Ebbw Vale, Tredegar and Abertillery.
Highway authorities for local roads in Blaenau Gwent: Blaenau Gwent County Borough Council.
Choose your town in Blaenau Gwent
Guide prices in Blaenau Gwent
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,045–£2,045 + VAT · £1,245–£2,445 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,745–£2,745 + VAT · £2,095–£3,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,445–£3,395 + VAT · £2,945–£4,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Blaenau Gwent
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Ebbw Vale | Blaenau Gwent County Borough Council | Blaenau Gwent County Borough Council |
| Tredegar | Blaenau Gwent County Borough Council | Blaenau Gwent County Borough Council |
| Abertillery | Blaenau Gwent County Borough Council | Blaenau Gwent County Borough Council |
Rules for semi-automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Blaenau Gwent: FAQs
Do you cover all of Blaenau Gwent for semi-automatic bollards?
Yes — including Ebbw Vale, Tredegar and Abertillery. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Blaenau Gwent?
In Blaenau Gwent, typically £1,045–£3,395 per bollard, supplied and installed, plus VAT (£1,245–£4,045 including VAT for homeowners), with a minimum job of £1,145 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Blaenau Gwent?
For local roads, Blaenau Gwent County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.
What makes a semi-automatic bollard rise without power?
A gas strut or spring inside the cassette. Pushing the post down compresses it and a latch holds the post below ground. Turning the key releases the latch and the stored energy lifts the post.