Wales · 3 towns
Semi-automatic bollard installation in Neath Port Talbot
Semi-automatic bollards for sites across Neath Port Talbot: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Neath Port Talbot
Across Neath Port Talbot, typical sites for semi-automatic bollards include filling-station forecourts, high street shopfronts and community car parks. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Highway authorities for local roads in Neath Port Talbot: Neath Port Talbot Council.
Choose your town in Neath Port Talbot
Guide prices in Neath Port Talbot
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,045–£2,045 + VAT · £1,245–£2,445 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,745–£2,745 + VAT · £2,095–£3,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,445–£3,395 + VAT · £2,945–£4,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Neath Port Talbot
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Neath | Neath Port Talbot Council | Neath Port Talbot Council |
| Port Talbot | Neath Port Talbot Council | Neath Port Talbot Council |
| Ystalyfera | Neath Port Talbot Council | Neath Port Talbot Council |
Rules for semi-automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Neath Port Talbot: FAQs
Do you cover all of Neath Port Talbot for semi-automatic bollards?
Yes — including Neath, Port Talbot and Ystalyfera. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Neath Port Talbot?
In Neath Port Talbot, typically £1,045–£3,395 per bollard, supplied and installed, plus VAT (£1,245–£4,045 including VAT for homeowners), with a minimum job of £1,145 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Neath Port Talbot?
For local roads, Neath Port Talbot Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What makes a semi-automatic bollard rise without power?
A gas strut or spring inside the cassette. Pushing the post down compresses it and a latch holds the post below ground. Turning the key releases the latch and the stored energy lifts the post.
Why has my semi-automatic bollard stopped rising fully?
Usually because the gas strut has lost pressure, or debris and water in the cassette are slowing it. Check and clean the cassette first. If it still stops short, the strut needs replacing.