Tyne and Wear · England
Semi-automatic bollard installation in Felling
Semi-automatic bollards supplied and fitted in Felling, Tyne and Wear: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout semi-automatic bollards in Felling
From community car parks, residential driveways and filling-station forecourts, Felling has plenty of places where semi-automatic bollards earn their keep. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
We cover Felling's NE10 postcode district, including places such as Follingsby. Jobs in Felling can be combined with work in Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles) and Wallsend (3 miles) (straight-line distances).
Felling at a glance
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE10
- Guide price
- Typically £1,045–£3,345 per bollard + VAT (£1,245–£3,995 inc VAT for homes); minimum job £1,145
- Survey
- Free, with a fixed written quote
- Nearby
- Gateshead (1.4 mi), Newcastle upon Tyne (2.2 mi), Hebburn (2.6 mi), Wallsend (3 mi)
Guide prices for Felling
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,045–£1,995 + VAT · £1,245–£2,395 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,745–£2,695 + VAT · £2,095–£3,245 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,445–£3,345 + VAT · £2,945–£3,995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Typical semi-automatic bollards jobs in Felling
Common uses in a place like Felling:
- Sites where telescopic posts are too heavy for regular users
- Temporary closure points on campuses and estates
- Delivery entrances without a power supply nearby
What we check first in Felling
The highway authority for local roads in Felling is Gateshead Council; motorways and trunk roads sit with National Highways. Semi-automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Felling is listed or inside a conservation area, check with the local planning authority (Gateshead Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Buried services across the entrance are traced and the position adjusted if needed, as the cassette cannot simply be made shallower. Because the cassette houses both the post and its strut mechanism, the pit is deep and must stay dry.
- Agree how emergency services will gain access if the post is locked up.
- Check land ownership; bollards on public highway need the highway authority's agreement.
How the job runs
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Choosing the right spec
| Option | Detail |
|---|---|
| Head lighting | Some models include battery or solar LEDs in the head to improve visibility on unlit sites. |
| Height and diameter | Raised heights commonly around 500–900 mm and diameters around 100–200 mm, depending on model and duty. |
| Lock types | Keyed cylinder locks, typically operating at ground level, with keyed-alike options for multi-post sites. |
What affects the quote
Two Felling jobs with the same number of posts can price quite differently. The usual reasons:
- Domestic or commercial duty model
- Finish and any head lighting
- Excavation depth and services in the way
Looking after them
If several posts on one site were installed at the same time, their struts tend to wear at a similar rate, so it can make sense to replace them together. Do not try to dismantle the strut assembly without the right procedure, as it holds stored energy.
For damaged or loose posts in Felling, repairs and replacements are priced in writing first.
Questions about semi-automatic bollards in Felling
Which parts of Felling do you cover for semi-automatic bollards?
We cover all of Felling (NE10) and the rest of Tyne and Wear. We also work in Gateshead, Newcastle upon Tyne and Hebburn.
Do I need consent for semi-automatic bollards on a public footway in Felling?
In Felling, work on adopted pavements and verges needs consent from Gateshead Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do semi-automatic bollards cost in Felling?
In Felling, typically £1,045–£3,345 per bollard, supplied and installed, plus VAT (£1,245–£3,995 including VAT for homeowners), with a minimum job of £1,145 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
How is a semi-automatic bollard different from an automatic one?
An automatic bollard is powered and controlled by a panel, loops and access devices. A semi-automatic one rises on its own when unlocked but must be pushed down by hand. It needs no electrics, which keeps installation simpler.
Can a semi-automatic bollard injure someone as it rises?
It rises with some force, so nobody should stand over it or put a hand on the head when releasing it. Users should be shown how to operate it safely. On busy sites, a sign and reflective bands help.
Semi-automatic bollards near Felling
- Gateshead (1.4 mi)
- Newcastle upon Tyne (2.2 mi)
- Hebburn (2.6 mi)
- Wallsend (3 mi)
- Jarrow (3.9 mi)
- Washington (4.3 mi)