Tyne and Wear · England
Shallow-mount security bollard installation in Felling
Planning shallow-mount bollards in Felling? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout shallow-mount bollards in Felling
Across Felling, typical sites for shallow-mount bollards include filling-station forecourts, small industrial units and town-centre squares. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We cover Felling's NE10 postcode district, including places such as Follingsby. Jobs in Felling can be combined with work in Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles) and Wallsend (3 miles) (straight-line distances).
Key facts for this area
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE10
- Guide price
- Typically £1,895–£8,645 per bollard + VAT; minimum job £4,795
- Survey
- Free, with a fixed written quote
- Nearby
- Gateshead (1.4 mi), Newcastle upon Tyne (2.2 mi), Hebburn (2.6 mi), Wallsend (3 mi)
Shallow-mount bollards in Felling: common uses
Common uses in a place like Felling:
- Podium decks, car park roofs and basement slabs
- Listed or historic streets where deep digging is unwelcome
- Footways with dense utility runs just below the surface
What shallow-mount bollards cost in Felling
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,895–£4,745 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,945–£6,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,945–£8,645 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Felling
Gateshead Council is the highway authority covering Felling's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Gateshead Council) first — we flag this at survey.
On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail. The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first.
- Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
Installation, step by step
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Options to consider
| Option | Detail |
|---|---|
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
What affects the quote
When we price shallow-mount bollards in Felling, these make the biggest difference:
- Changes of direction, end details and removable positions
- Structural engineering checks on slabs or decks
- Length of run and the system needed to achieve the rating
Keeping them working
Any later utility work beside the line should be supervised so the frame is not undermined. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
For damaged or loose posts in Felling, repairs and replacements are priced in writing first.
Common questions
Can you install shallow-mount bollards anywhere in Felling?
We cover all of Felling (NE10) and the rest of Tyne and Wear. We also work in Gateshead, Newcastle upon Tyne and Hebburn.
Do I need consent for shallow-mount bollards on a public footway in Felling?
In Felling, work on adopted pavements and verges needs consent from Gateshead Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for shallow-mount bollards in Felling?
In Felling, typically £1,895–£8,645 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,795 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Shallow-mount bollards in nearby towns
- Gateshead (1.4 mi)
- Newcastle upon Tyne (2.2 mi)
- Hebburn (2.6 mi)
- Wallsend (3 mi)
- Jarrow (3.9 mi)
- Washington (4.3 mi)