Bollard Installers

England · 13 towns

Shallow-mount security bollard installation in Tyne and Wear

Shallow-mount bollards for sites across Tyne and Wear: surveyed, quoted in writing and installed by our crews.

Line of dark grey security bollards on a pedestrianised high street with stone paving and a utility access cover beside themComputer-generated image

Shallow-mount bollards in Tyne and Wear

We supply and install shallow-mount bollards across Tyne and Wear, with local pages for 13 towns below. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.

Highway authorities for local roads in Tyne and Wear: Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council.

Choose your town in Tyne and Wear

Guide prices in Tyne and Wear

SpecificationGuide priceIncludes
Standard£1,895–£4,745 + VATRated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation
Upgraded£3,945–£6,745 + VATRated for 7.5 t at 40 mph (64 km/h), tested foundation
Premium£5,945–£8,645 + VATRated for 7.5 t at 50 mph (80 km/h), or a specialist foundation

Per bollard position, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.

Local authorities across Tyne and Wear

TownHighway / roads authorityPlanning authority
Newcastle upon TyneNewcastle City Councilthe council for Newcastle upon Tyne
SunderlandSunderland City CouncilSunderland City Council
South ShieldsSouth Tyneside CouncilSouth Tyneside Council
GatesheadGateshead CouncilGateshead Council
WashingtonSunderland City CouncilSunderland City Council
TynemouthNorth Tyneside CouncilNorth Tyneside Council
WallsendNorth Tyneside CouncilNorth Tyneside Council
North ShieldsNorth Tyneside CouncilNorth Tyneside Council
Whitley BayNorth Tyneside CouncilNorth Tyneside Council
Houghton-le-SpringSunderland City CouncilSunderland City Council
FellingGateshead CouncilGateshead Council
JarrowSouth Tyneside CouncilSouth Tyneside Council
HebburnSouth Tyneside CouncilSouth Tyneside Council

Rules for shallow-mount bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.

Details and sources: bollard rules in England.

How installation works

Map what is underground

Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.

Assemble and level the frame

Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.

Pour, cure and reinstate

Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.

Record and hand over

As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.

Shallow-mount bollards in Tyne and Wear: FAQs

Do you cover all of Tyne and Wear for shallow-mount bollards?

Yes — including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and North Shields. Enter your postcode in the price calculator to confirm.

How much do shallow-mount bollards cost in Tyne and Wear?

In Tyne and Wear, typically £1,895–£8,645 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,795 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Tyne and Wear?

For local roads, Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Can shallow-mount bollards go on a car park deck?

Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.

What if a service turns out to be higher than the records show?

Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.

Other services in Tyne and Wear

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote