Tyne and Wear · England
Lighting bollard installation in Felling
Lighting bollards supplied and fitted in Felling, Tyne and Wear: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout lighting bollards in Felling
We supply and fit lighting bollards throughout Felling, typically for sites such as community buildings, community car parks and high street shopfronts. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We cover Felling's NE10 postcode district, including places such as Follingsby. We also cover neighbouring Gateshead (1.4 miles), Newcastle upon Tyne (2.2 miles), Hebburn (2.6 miles) and Wallsend (3 miles) — distances are straight-line.
Local details
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE10
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £805
- Survey
- Free, with a fixed written quote
- Nearby
- Gateshead (1.4 mi), Newcastle upon Tyne (2.2 mi), Hebburn (2.6 mi), Wallsend (3 mi)
Lighting bollards in Felling: common uses
Typical reasons Felling sites choose lighting bollards:
- Footpaths through housing developments and campuses
- Parks and areas where tall columns would be intrusive
- Hotel, restaurant and pub frontages
Lighting bollard prices in Felling
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£675 + VAT · £395–£805 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £575–£915 + VAT · £685–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -4% for North East. Guide only — the fixed price follows a survey.
What we check first in Felling
Gateshead Council is the highway authority covering Felling's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Felling need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Gateshead Council before posts go in.
Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later. Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape.
- Where bollards light a public route, check the lighting levels the site owner or designer requires.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
How the job runs
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Specification choices
| Option | Detail |
|---|---|
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
What moves the price in Felling
Two Felling jobs with the same number of posts can price quite differently. The usual reasons:
- Length of cable routes and surfaces to be cut
- Reinstatement of paving, tarmac or planting
- Number of bollards and their specification
Keeping them working
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician.
If posts in Felling are later hit or damaged, we can repair or replace them — see bollard repairs.
Lighting bollards in Felling: FAQs
Can you install lighting bollards anywhere in Felling?
We cover all of Felling (NE10) and the rest of Tyne and Wear. We also work in Gateshead, Newcastle upon Tyne and Hebburn.
Do I need consent for lighting bollards on a public footway in Felling?
The highway authority for local roads in Felling is Gateshead Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do lighting bollards cost in Felling?
In Felling, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £805 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Can bollard lights work on a timer or motion sensor?
Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.
Lighting bollards in nearby towns
- Gateshead (1.4 mi)
- Newcastle upon Tyne (2.2 mi)
- Hebburn (2.6 mi)
- Wallsend (3 mi)
- Jarrow (3.9 mi)
- Washington (4.3 mi)