Wales · 3 towns
Semi-automatic bollard installation in Vale of Glamorgan
Semi-automatic bollards for sites across Vale of Glamorgan: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Vale of Glamorgan
We supply and install semi-automatic bollards across Vale of Glamorgan, with local pages for 3 towns below. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Highway authorities for local roads in Vale of Glamorgan: Vale of Glamorgan Council.
Choose your town in Vale of Glamorgan
Guide prices in Vale of Glamorgan
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,045–£2,045 + VAT · £1,245–£2,445 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,745–£2,745 + VAT · £2,095–£3,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,445–£3,395 + VAT · £2,945–£4,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Vale of Glamorgan
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Barry | Vale of Glamorgan Council | Vale of Glamorgan Council |
| Penarth | Vale of Glamorgan Council | Vale of Glamorgan Council |
| Llantwit Major | Vale of Glamorgan Council | Vale of Glamorgan Council |
Rules for semi-automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Vale of Glamorgan: FAQs
Do you cover all of Vale of Glamorgan for semi-automatic bollards?
Yes — including Barry, Penarth and Llantwit Major. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Vale of Glamorgan?
In Vale of Glamorgan, typically £1,045–£3,395 per bollard, supplied and installed, plus VAT (£1,245–£4,045 including VAT for homeowners), with a minimum job of £1,145 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Vale of Glamorgan?
For local roads, Vale of Glamorgan Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
How is a semi-automatic bollard different from an automatic one?
An automatic bollard is powered and controlled by a panel, loops and access devices. A semi-automatic one rises on its own when unlocked but must be pushed down by hand. It needs no electrics, which keeps installation simpler.
Why has my semi-automatic bollard stopped rising fully?
Usually because the gas strut has lost pressure, or debris and water in the cassette are slowing it. Check and clean the cassette first. If it still stops short, the strut needs replacing.