Wales · 2 towns
Shallow-mount security bollard installation in Denbighshire
Shallow-mount bollards for sites across Denbighshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Denbighshire
Across Denbighshire, typical sites for shallow-mount bollards include town-centre squares, high street shopfronts and schools. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in Denbighshire: Denbighshire County Council.
Choose your town in Denbighshire
Guide prices in Denbighshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,795 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,845 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,995–£8,745 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Denbighshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Rhyl | Denbighshire County Council | Denbighshire County Council |
| Prestatyn | Denbighshire County Council | Denbighshire County Council |
Rules for shallow-mount bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in Denbighshire: FAQs
Do you cover all of Denbighshire for shallow-mount bollards?
Yes — including Rhyl and Prestatyn. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Denbighshire?
In Denbighshire, typically £1,945–£8,745 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,845 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Denbighshire?
For local roads, Denbighshire County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.