Scotland · 4 towns
Shallow-mount security bollard installation in East Dunbartonshire
Shallow-mount bollards for sites across East Dunbartonshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in East Dunbartonshire
Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation. We cover East Dunbartonshire — Bearsden, Bishopbriggs, Kirkintilloch and Milngavie.
Highway and roads authorities for local roads in East Dunbartonshire: East Dunbartonshire Council.
Choose your town in East Dunbartonshire
Guide prices in East Dunbartonshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Local authorities across East Dunbartonshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Bearsden | East Dunbartonshire Council | East Dunbartonshire Council |
| Bishopbriggs | East Dunbartonshire Council | East Dunbartonshire Council |
| Kirkintilloch | East Dunbartonshire Council | East Dunbartonshire Council |
| Milngavie | East Dunbartonshire Council | East Dunbartonshire Council |
Rules for shallow-mount bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Shallow-mount bollards in East Dunbartonshire: FAQs
Do you cover all of East Dunbartonshire for shallow-mount bollards?
Yes — including Bearsden, Bishopbriggs, Kirkintilloch and Milngavie. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in East Dunbartonshire?
In East Dunbartonshire, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in East Dunbartonshire?
The council is the roads authority for local roads (East Dunbartonshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.