Gloucestershire · England
Shallow-mount security bollard installation in Gloucester
Shallow-mount bollards for sites across Gloucester and the rest of Gloucestershire, from the first measurement to the last relaid paving block.
Computer-generated imageShallow-mount bollards in Gloucester
Shallow-mount bollards suit plenty of Gloucester sites, college campuses, retail parks and leisure centres among them. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We work across GL1, GL2 and GL4 — Gloucester itself and places including Quedgeley and Hardwicke. Jobs in Gloucester can be combined with work in Cheltenham (7.4 miles), Stroud (8.2 miles), Tewkesbury (9.4 miles) and Cirencester (15.4 miles) (straight-line distances). It sits roughly 29 miles from Swindon as the crow flies.
Key facts for this area
- Area
- Gloucestershire, England
- Highway authority
- Gloucestershire County Council (local roads)
- Planning authority
- Gloucestershire County Council
- Postcodes
- GL1, GL2 and GL4
- Guide price
- Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
- Survey
- Free, with a fixed written quote
- Nearby
- Cheltenham (7.4 mi), Stroud (8.2 mi), Tewkesbury (9.4 mi), Cirencester (15.4 mi)
What shallow-mount bollards cost in Gloucester
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Gloucester sites use shallow-mount bollards for
Common uses in a place like Gloucester:
- Lines that must cross over shallow drainage or ducts
- Listed or historic streets where deep digging is unwelcome
- Bridges and structures where excavation depth is limited
Permissions and groundwork in Gloucester
Gloucestershire County Council is the highway authority covering Gloucester's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Gloucestershire County Council) first — we flag this at survey.
Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job. Utility owners may set minimum separation distances or ask to be present when digging near their apparatus.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
Installation, step by step
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Choosing the right spec
| Option | Detail |
|---|---|
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
What moves the price in Gloucester
Our South West guide prices are a starting point; the survey in Gloucester firms them up. What tends to move them:
- Restricted working hours in busy streets or occupied sites
- Amount of hand digging needed around live services
- Lifting, storing and relaying natural stone paving
Looking after them
Any later utility work beside the line should be supervised so the frame is not undermined. Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer.
We can also service, repair or replace existing posts anywhere in Gloucester.
Questions about shallow-mount bollards in Gloucester
Which parts of Gloucester do you cover for shallow-mount bollards?
We cover all of Gloucester (GL1, GL2 and GL4) and the rest of Gloucestershire. We also work in Cheltenham, Stroud and Tewkesbury.
Do I need consent for shallow-mount bollards on a public footway in Gloucester?
The highway authority for local roads in Gloucester is Gloucestershire County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do shallow-mount bollards cost in Gloucester?
In Gloucester, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What if a service turns out to be higher than the records show?
Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Shallow-mount bollards near Gloucester
- Cheltenham (7.4 mi)
- Stroud (8.2 mi)
- Tewkesbury (9.4 mi)
- Cirencester (15.4 mi)
- Great Malvern (17.3 mi)
- Evesham (20.1 mi)