Gloucestershire · England
Shallow-mount security bollard installation in Stroud
Local installation of shallow-mount bollards in Stroud — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageStroud shallow-mount bollards
We supply and fit shallow-mount bollards throughout Stroud, typically for sites such as schools, town-centre squares and community car parks. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We cover Stroud's GL5, GL6 and GL10 postcode districts, including places such as Brimscombe, Woodchester, Far Thrupp and Selsley. Jobs in Stroud can be combined with work in Gloucester (8.2 miles), Cirencester (10 miles), Cheltenham (11.6 miles) and Tewkesbury (16.8 miles) (straight-line distances). It sits roughly 22 miles from Swindon as the crow flies.
Local details
- Area
- Gloucestershire, England
- Highway authority
- Gloucestershire County Council (local roads)
- Planning authority
- the council for Stroud
- Postcodes
- GL5, GL6 and GL10
- Guide price
- Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
- Survey
- Free, with a fixed written quote
- Nearby
- Gloucester (8.2 mi), Cirencester (10 mi), Cheltenham (11.6 mi), Tewkesbury (16.8 mi)
Stroud: typical shallow-mount bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical shallow-mount bollards jobs in Stroud
Around Stroud, shallow-mount bollards usually solve one of these:
- Retrofits outside occupied buildings with tight programmes
- Podium decks, car park roofs and basement slabs
- Lines that must cross over shallow drainage or ducts
Permissions and groundwork in Stroud
In Stroud, work on adopted pavements and verges needs consent from Gloucestershire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Stroud) first — we flag this at survey.
Utility owners may set minimum separation distances or ask to be present when digging near their apparatus. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
- Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
How the job runs
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Finishes and options
| Option | Detail |
|---|---|
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
What affects the quote
Two Stroud jobs with the same number of posts can price quite differently. The usual reasons:
- Lifting, storing and relaying natural stone paving
- Restricted working hours in busy streets or occupied sites
- Length of run and the system needed to achieve the rating
Looking after them
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer.
We can also service, repair or replace existing posts anywhere in Stroud.
Shallow-mount bollards in Stroud: FAQs
Which parts of Stroud do you cover for shallow-mount bollards?
We cover all of Stroud (GL5, GL6 and GL10) and the rest of Gloucestershire. We also work in Gloucester, Cirencester and Cheltenham.
Who gives permission for bollards on the pavement in Stroud?
Gloucestershire County Council is the highway authority covering Stroud's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do shallow-mount bollards cost in Stroud?
In Stroud, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Shallow-mount bollards near Stroud
- Gloucester (8.2 mi)
- Cirencester (10 mi)
- Cheltenham (11.6 mi)
- Tewkesbury (16.8 mi)
- Yate (17.2 mi)
- Chippenham (20.3 mi)