Greater Manchester · England
Shallow-mount security bollard installation in Manchester
Shallow-mount bollards for sites across Manchester and the rest of Greater Manchester, from the first measurement to the last relaid paving block.
Computer-generated imageManchester shallow-mount bollards
Like any rated product, its performance applies only to the configuration and foundation that were tested. In Manchester, that tends to mean sites such as office forecourts, university campuses and pedestrianised streets.
We cover the M1, M2, M4, M15, M13 and M12 postcode districts in Manchester. We also cover neighbouring Salford (2.2 miles), Failsworth (3.4 miles), Droylsden (3.8 miles) and Eccles (3.9 miles) — distances are straight-line. Manchester is about 6 miles from Oldham.
Key facts for this area
- Area
- Greater Manchester, England
- Highway authority
- Manchester City Council (local roads)
- Planning authority
- Manchester City Council
- Postcodes
- M1, M2, M4, M15, M13, M12, M8 and M14
- Guide price
- Typically £1,945–£8,795 per bollard + VAT; minimum job £4,895
- Survey
- Free, with a fixed written quote
- Nearby
- Salford (2.2 mi), Failsworth (3.4 mi), Droylsden (3.8 mi), Eccles (3.9 mi)
What shallow-mount bollards cost in Manchester
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,845 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,095–£8,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Where shallow-mount bollards go in around Manchester
Typical reasons Manchester sites choose shallow-mount bollards:
- Podium decks, car park roofs and basement slabs
- Bridges and structures where excavation depth is limited
- Retrofits outside occupied buildings with tight programmes
What we check first in Manchester
The highway authority for local roads in Manchester is Manchester City Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Manchester is listed or inside a conservation area, check with the local planning authority (Manchester City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Utility owners may set minimum separation distances or ask to be present when digging near their apparatus. The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
Installation, step by step
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
What moves the price in Manchester
When we price shallow-mount bollards in Manchester, these make the biggest difference:
- Length of run and the system needed to achieve the rating
- Changes of direction, end details and removable positions
- Lifting, storing and relaying natural stone paving
Keeping them working
If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation. Any later utility work beside the line should be supervised so the frame is not undermined.
We can also service, repair or replace existing posts anywhere in Manchester.
Common questions
Which parts of Manchester do you cover for shallow-mount bollards?
We cover all of Manchester (M1, M2, M4, M15, M13 and M12) and the rest of Greater Manchester. We also work in Salford, Failsworth and Droylsden.
Who gives permission for bollards on the pavement in Manchester?
The highway authority for local roads in Manchester is Manchester City Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Manchester?
In Manchester, typically £1,945–£8,795 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,895 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What if a service turns out to be higher than the records show?
Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Shallow-mount bollards in nearby towns
- Salford (2.2 mi)
- Failsworth (3.4 mi)
- Droylsden (3.8 mi)
- Eccles (3.9 mi)
- Stretford (3.9 mi)
- Prestwich (4.1 mi)