Hampshire · England
Shallow-mount security bollard installation in Portsmouth
Shallow-mount bollards supplied and fitted in Portsmouth, Hampshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageShallow-mount bollards in Portsmouth
From pedestrianised streets, university campuses and city-centre plazas, Portsmouth has plenty of places where shallow-mount bollards earn their keep. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We cover the PO1, PO5, PO4, PO2, PO3 and PO6 postcode districts in Portsmouth. We also cover neighbouring Gosport (1.7 miles), Fareham (5.3 miles), Havant (6.1 miles) and Waterlooville (6.2 miles) — distances are straight-line. Portsmouth is about 15 miles from Southampton.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Portsmouth City Council (local roads)
- Planning authority
- Portsmouth City Council
- Postcodes
- PO1, PO5, PO4, PO2, PO3 and PO6
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
- Nearby
- Gosport (1.7 mi), Fareham (5.3 mi), Havant (6.1 mi), Waterlooville (6.2 mi)
What Portsmouth sites use shallow-mount bollards for
Typical reasons Portsmouth sites choose shallow-mount bollards:
- Listed or historic streets where deep digging is unwelcome
- Bridges and structures where excavation depth is limited
- Lines that must cross over shallow drainage or ducts
Guide prices for Portsmouth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Portsmouth
Portsmouth City Council is the highway authority covering Portsmouth's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Portsmouth City Council) first — we flag this at survey.
Shallow does not mean simple. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
- Record the frame's position on as-built drawings so future excavation near the line can be planned safely.
From survey to handover
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Finishes and options
| Option | Detail |
|---|---|
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Covers and sleeves | Stainless, cast or powder-coated covers fitted over the cores to match surrounding street furniture, supplied or approved by the manufacturer. |
Pricing shallow-mount bollards in Portsmouth
Two Portsmouth jobs with the same number of posts can price quite differently. The usual reasons:
- Lifting, storing and relaying natural stone paving
- Changes of direction, end details and removable positions
- Amount of hand digging needed around live services
After installation
Any later utility work beside the line should be supervised so the frame is not undermined. Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer.
We can also service, repair or replace existing posts anywhere in Portsmouth.
Questions about shallow-mount bollards in Portsmouth
Do you install shallow-mount bollards in Portsmouth?
We cover all of Portsmouth (PO1, PO5, PO4, PO2, PO3 and PO6) and the rest of Hampshire. We also work in Gosport, Fareham and Havant.
Do I need consent for shallow-mount bollards on a public footway in Portsmouth?
The highway authority for local roads in Portsmouth is Portsmouth City Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Portsmouth?
In Portsmouth, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if a service turns out to be higher than the records show?
Work stops at that position and the finding goes back to the manufacturer and your adviser. Sometimes the frame can be adjusted within tested limits; sometimes the utility has to be lowered or the line moved. We do not improvise a change to a rated foundation on site.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Shallow-mount bollards in nearby towns
- Gosport (1.7 mi)
- Fareham (5.3 mi)
- Havant (6.1 mi)
- Waterlooville (6.2 mi)
- Chichester (13.8 mi)
- Hythe (14.2 mi)