Hampshire · England
Shallow-mount security bollard installation in Gosport
Local installation of shallow-mount bollards in Gosport — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageGosport shallow-mount bollards
We supply and fit shallow-mount bollards throughout Gosport, typically for sites such as leisure centres, town-centre streets and retail parks. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Coverage in Gosport takes in the PO12 and PO13 postcode districts and nearby places like Lee-on-the-Solent. Jobs in Gosport can be combined with work in Portsmouth (1.7 miles), Fareham (4.5 miles), Waterlooville (7.3 miles) and Havant (7.6 miles) (straight-line distances).
Gosport at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Gosport
- Postcodes
- PO12 and PO13
- Guide price
- Typically £2,095–£9,545 per bollard + VAT; minimum job £5,295
- Survey
- Free, with a fixed written quote
- Nearby
- Portsmouth (1.7 mi), Fareham (4.5 mi), Waterlooville (7.3 mi), Havant (7.6 mi)
What Gosport sites use shallow-mount bollards for
Typical reasons Gosport sites choose shallow-mount bollards:
- Bridges and structures where excavation depth is limited
- Podium decks, car park roofs and basement slabs
- Sites where service diversions would be slow or impractical
Gosport: typical shallow-mount bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,095–£5,245 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,345–£7,445 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,545–£9,545 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Gosport
The highway authority for local roads in Gosport is Hampshire County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Gosport) first — we flag this at survey.
The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
- Agree works and separation distances with utility owners, and with the highway authority where the line is on public highway.
Installation, step by step
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Choosing the right spec
| Option | Detail |
|---|---|
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
What moves the price in Gosport
Two Gosport jobs with the same number of posts can price quite differently. The usual reasons:
- Amount of hand digging needed around live services
- Length of run and the system needed to achieve the rating
- Structural engineering checks on slabs or decks
Looking after them
Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands. Any later utility work beside the line should be supervised so the frame is not undermined.
We can also service, repair or replace existing posts anywhere in Gosport.
Shallow-mount bollards in Gosport: FAQs
Can you install shallow-mount bollards anywhere in Gosport?
We cover all of Gosport (PO12 and PO13) and the rest of Hampshire. We also work in Portsmouth, Fareham and Waterlooville.
Who gives permission for bollards on the pavement in Gosport?
The highway authority for local roads in Gosport is Hampshire County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for shallow-mount bollards in Gosport?
In Gosport, typically £2,095–£9,545 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,295 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Shallow-mount bollards near Gosport
- Portsmouth (1.7 mi)
- Fareham (4.5 mi)
- Waterlooville (7.3 mi)
- Havant (7.6 mi)
- Hythe (12.7 mi)
- Southampton (14.2 mi)