Northamptonshire · England
Shallow-mount security bollard installation in Corby
Shallow-mount bollards for sites across Corby and the rest of Northamptonshire, from the first measurement to the last relaid paving block.
Computer-generated imageShallow-mount bollards in Corby
Shallow-mount bollards suit plenty of Corby sites, small industrial units, filling-station forecourts and town-centre squares among them. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Coverage in Corby takes in the NN17 and NN18 postcode districts and nearby places like Weldon. We also cover neighbouring Kettering (6.9 miles), Market Harborough (9.8 miles), Oakham (11.9 miles) and Wellingborough (13.4 miles) — distances are straight-line. It sits roughly 19 miles from Northampton as the crow flies.
Corby at a glance
- Area
- Northamptonshire, England
- Highway authority
- North Northamptonshire Council (local roads)
- Planning authority
- North Northamptonshire Council
- Postcodes
- NN17 and NN18
- Guide price
- Typically £1,945–£8,795 per bollard + VAT; minimum job £4,895
- Survey
- Free, with a fixed written quote
- Nearby
- Kettering (6.9 mi), Market Harborough (9.8 mi), Oakham (11.9 mi), Wellingborough (13.4 mi)
Shallow-mount bollards in Corby: common uses
Around Corby, shallow-mount bollards usually solve one of these:
- Podium decks, car park roofs and basement slabs
- Sites where service diversions would be slow or impractical
- Listed or historic streets where deep digging is unwelcome
Shallow-mount bollard prices in Corby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,845 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,095–£8,795 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Before we dig in Corby
North Northamptonshire Council is the highway authority covering Corby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Northamptonshire Council) first — we flag this at survey.
Utility owners may set minimum separation distances or ask to be present when digging near their apparatus. Paving is often natural stone in the streets where these systems are used, so careful lifting, storage and relaying is part of the job.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Check gaps work for wheelchair users and buggies while still stopping vehicles, referring to Inclusive Mobility guidance.
What happens on site
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Options to consider
| Option | Detail |
|---|---|
| Removable posts within a run | Some systems include removable or retractable positions for maintenance or emergency access. Check how these affect the rating. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
What moves the price in Corby
Two Corby jobs with the same number of posts can price quite differently. The usual reasons:
- Structural engineering checks on slabs or decks
- Amount of hand digging needed around live services
- Restricted working hours in busy streets or occupied sites
Keeping them working
Any later utility work beside the line should be supervised so the frame is not undermined. Once cured, a shallow-mount line needs much the same care as any static rated barrier: periodic visual checks, cleaning of covers and renewal of visibility bands.
If posts in Corby are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about shallow-mount bollards in Corby
Do you install shallow-mount bollards in Corby?
We cover all of Corby (NN17 and NN18) and the rest of Northamptonshire. We also work in Kettering, Market Harborough and Oakham.
Who gives permission for bollards on the pavement in Corby?
North Northamptonshire Council is the highway authority covering Corby's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do shallow-mount bollards cost in Corby?
In Corby, typically £1,945–£8,795 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,895 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Shallow-mount bollards in nearby towns
- Kettering (6.9 mi)
- Market Harborough (9.8 mi)
- Oakham (11.9 mi)
- Wellingborough (13.4 mi)
- Stamford (13.7 mi)
- Rushden (14.8 mi)