Northamptonshire · England
Telescopic bollard installation in Corby
Telescopic bollards for sites across Corby and the rest of Northamptonshire, from the first measurement to the last relaid paving block.
Computer-generated imageCorby telescopic bollards
In the town of Corby, telescopic bollards tend to go in at schools, community car parks and small industrial units. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across NN17 and NN18 — Corby itself and places including Weldon. Nearby, we also work in Kettering (6.9 miles), Market Harborough (9.8 miles), Oakham (11.9 miles) and Wellingborough (13.4 miles), measured as the crow flies. Northampton is around 19 miles away.
Key facts for this area
- Area
- Northamptonshire, England
- Highway authority
- North Northamptonshire Council (local roads)
- Planning authority
- North Northamptonshire Council
- Postcodes
- NN17 and NN18
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Kettering (6.9 mi), Market Harborough (9.8 mi), Oakham (11.9 mi), Wellingborough (13.4 mi)
What telescopic bollards cost in Corby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Where telescopic bollards go in around Corby
Common uses in a place like Corby:
- Domestic driveways where the bollard is used daily
- Access roads closed outside working hours
- Car parks where a removable post would go missing
Before we dig in Corby
The highway authority for local roads in Corby is North Northamptonshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Corby need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at North Northamptonshire Council before posts go in.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
Two Corby jobs with the same number of posts can price quite differently. The usual reasons:
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
- Excavation depth and the presence of services under the drive
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lubricate the lock with a suitable spray, especially before winter.
If posts in Corby are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about telescopic bollards in Corby
Do you install telescopic bollards in Corby?
We cover all of Corby (NN17 and NN18) and the rest of Northamptonshire. We also work in Kettering, Market Harborough and Oakham.
Who gives permission for bollards on the pavement in Corby?
The highway authority for local roads in Corby is North Northamptonshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for telescopic bollards in Corby?
In Corby, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards near Corby
- Kettering (6.9 mi)
- Market Harborough (9.8 mi)
- Oakham (11.9 mi)
- Wellingborough (13.4 mi)
- Stamford (13.7 mi)
- Rushden (14.8 mi)