Northamptonshire · England
Telescopic bollard installation in Wellingborough
Planning telescopic bollards in Wellingborough? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout telescopic bollards in Wellingborough
Whether it's local parades, small industrial units and high street shopfronts, telescopic bollards in Wellingborough are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Wellingborough takes in the NN8 and NN29 postcode districts and nearby places like Little Irchester, Wollaston, Irchester and Bozeat. Jobs in Wellingborough can be combined with work in Rushden (4 miles), Kettering (6.7 miles), Northampton (8.8 miles) and Corby (13.4 miles) (straight-line distances). Northampton is around 9 miles away.
Key facts for this area
- Area
- Northamptonshire, England
- Highway authority
- North Northamptonshire Council (local roads)
- Planning authority
- North Northamptonshire Council
- Postcodes
- NN8 and NN29
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Rushden (4 mi), Kettering (6.7 mi), Northampton (8.8 mi), Corby (13.4 mi)
Where telescopic bollards go in around Wellingborough
Common uses in a place like Wellingborough:
- Commercial yards where posts must not be left lying around
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
Guide prices for Wellingborough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Permissions and groundwork in Wellingborough
The highway authority for local roads in Wellingborough is North Northamptonshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Northamptonshire Council) first — we flag this at survey.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
Installation, step by step
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What moves the price in Wellingborough
Two Wellingborough jobs with the same number of posts can price quite differently. The usual reasons:
- Drainage: simple soakaway or a connection to a drain
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
After installation
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Wellingborough.
Telescopic bollards in Wellingborough: FAQs
Do you install telescopic bollards in Wellingborough?
We cover all of Wellingborough (NN8 and NN29) and the rest of Northamptonshire. We also work in Rushden, Kettering and Northampton.
Do I need consent for telescopic bollards on a public footway in Wellingborough?
North Northamptonshire Council is the highway authority covering Wellingborough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Wellingborough?
In Wellingborough, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards near Wellingborough
- Rushden (4 mi)
- Kettering (6.7 mi)
- Northampton (8.8 mi)
- Corby (13.4 mi)
- Bedford (15.1 mi)
- Market Harborough (15.4 mi)