Argyll and Bute · Scotland
Stainless steel bollards and covers in Dunoon
Stainless steel bollards for sites across Dunoon and the rest of Argyll and Bute, from the first measurement to the last relaid paving block.
Computer-generated imageStainless steel bollards in Dunoon
Stainless steel bollards and sleeve covers in 304 or 316 grade, for building entrances, plazas and upgrading tired steel posts. In Dunoon, that tends to mean sites such as town-centre squares, schools and high street shopfronts.
We work across PA23 — Dunoon itself and places including Sandbank, Innellan, Kilmun and Blairmore. Dunoon is fairly self-contained, with no other large town within about 20 miles.
Key facts for this area
- Area
- Argyll and Bute, Scotland
- Roads authority
- Argyll and Bute Council (local roads)
- Planning authority
- Argyll and Bute Council
- Postcodes
- PA23
- Guide price
- Typically £295–£1,195 per bollard + VAT (£345–£1,445 inc VAT for homes); minimum job £695
- Survey
- Free, with a fixed written quote
Where stainless steel bollards go in around Dunoon
Common uses in a place like Dunoon:
- Matching stainless canopies, handrails and signage
- Office, hotel and hospital entrances
- Civic squares and pedestrianised plazas
Stainless steel bollard prices in Dunoon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £295–£675 + VAT · £345–£805 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £565–£945 + VAT · £675–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Dunoon
Dunoon falls under Argyll and Bute Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Argyll and Bute Council can confirm before anything is ordered.
Where covers go over existing posts, there is usually no excavation at all, but the base of the old post often sits in broken surfacing that is worth making good at the same time so the cover finishes neatly against a clean edge. The difference is in handling.
- On crash-rated bollards, confirm with the manufacturer that the cover is approved for the tested product.
- Add a contrasting band near the top, because bare stainless can blend into pale paving for partially sighted people.
From survey to handover
Prepare the cores
For covers, existing posts are checked for straightness, loose foundations and corrosion. Cores that lean or move are re-bedded first, because a cover will not hide a failing post for long.
Install new posts
New solid stainless posts are set in concrete, bolted down or fitted into sockets, with care taken not to scratch the finish or contaminate it with carbon steel tools.
Fit covers
Sleeves are slid over the cores, packed so they cannot rattle, and fixed with concealed fixings. A gap or drainage detail at the base stops water being trapped inside.
Choosing the right spec
| Option | Detail |
|---|---|
| Sleeve covers | Stainless sleeves over existing or new steel cores, sized to the core diameter, to refresh or upgrade appearance. |
| Solid stainless posts | Root-fixed, base-plated or removable posts, often concrete-filled or with a steel insert for strength. |
| Brushed or polished finish | Satin brushed finishes hide fingerprints and light scratches; mirror polish is striking but shows every mark. |
What affects the quote
When we price stainless steel bollards in Dunoon, these make the biggest difference:
- Grade 304 or 316 and the surface finish
- Manufacturer-approved covers for rated bollards
- Surface reinstatement and protection of the finish during works
Looking after them
Check covers for loose fixings and rattles, and look at the base for trapped water or rust from an old core underneath. Stainless steel is low maintenance, not no maintenance.
For damaged or loose posts in Dunoon, repairs and replacements are priced in writing first.
Stainless steel bollards in Dunoon: FAQs
Can you install stainless steel bollards anywhere in Dunoon?
We cover all of Dunoon (PA23) and the rest of Argyll and Bute.
Do I need consent for stainless steel bollards on a public footway in Dunoon?
Dunoon falls under Argyll and Bute Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for stainless steel bollards in Dunoon?
In Dunoon, typically £295–£1,195 per bollard, supplied and installed, plus VAT (£345–£1,445 including VAT for homeowners), with a minimum job of £695 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How should stainless bollards be cleaned?
With water and mild detergent, then rinsed and dried, more often in coastal or salty conditions. Use stainless cleaners and non-scratch pads for marks. Never use wire wool or steel brushes.
Can stainless covers go over our existing steel bollards?
Yes, if the existing posts are straight, firmly fixed and a size the covers can be made to fit. Leaning or loose posts are re-bedded first. It is often a quicker way to refresh a frontage than replacing every post.