Northern Ireland · 3 towns
Stainless steel bollards and covers in Mid and East Antrim
Stainless steel bollards for sites across Mid and East Antrim: surveyed, quoted in writing and installed by our crews.
Computer-generated imageStainless steel bollards in Mid and East Antrim
We supply and install stainless steel bollards across Mid and East Antrim, with local pages for 3 towns below. Stainless steel bollards and sleeve covers in 304 or 316 grade, for building entrances, plazas and upgrading tired steel posts.
Across Northern Ireland, DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways; councils handle planning.
Choose your town in Mid and East Antrim
Guide prices in Mid and East Antrim
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £285–£655 + VAT · £335–£785 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £555–£925 + VAT · £665–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £815–£1,195 + VAT · £975–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Local authorities across Mid and East Antrim
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Carrickfergus | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Ballymena | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
| Larne | the Department for Infrastructure (DfI Roads) | Mid and East Antrim Borough Council |
Rules for stainless steel bollards in Northern Ireland
Bollards on public footways and roads need DfI Roads consent under the Roads (NI) Order 1993; councils deal with planning. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first.
Details and sources: bollard rules in Northern Ireland.
How installation works
Survey and match
A free site survey records existing cores, diameters, heights and the setting, including any salt or coastal exposure that points to 316. You receive a fixed written quote covering grade, finish and fixing.
Install new posts
New solid stainless posts are set in concrete, bolted down or fitted into sockets, with care taken not to scratch the finish or contaminate it with carbon steel tools.
Fit covers
Sleeves are slid over the cores, packed so they cannot rattle, and fixed with concealed fixings. A gap or drainage detail at the base stops water being trapped inside.
Clean and protect
Fingerprints, grinding dust and adhesive residue are cleaned off with suitable stainless cleaners, and the protective film is removed only when surrounding work is finished.
Stainless steel bollards in Mid and East Antrim: FAQs
Do you cover all of Mid and East Antrim for stainless steel bollards?
Yes — including Carrickfergus, Ballymena and Larne. Enter your postcode in the price calculator to confirm.
How much do stainless steel bollards cost in Mid and East Antrim?
In Mid and East Antrim, typically £285–£1,195 per bollard, supplied and installed, plus VAT (£335–£1,445 including VAT for homeowners), with a minimum job of £675 plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Mid and East Antrim?
DfI Roads (the Department for Infrastructure) is the roads authority for public roads and footways throughout Northern Ireland; councils handle planning.
Why has our stainless steel gone brown?
Usually because of tea staining from chlorides, a grade unsuited to the location, a coarse finish that holds dirt, or iron contamination from nearby cutting. Most of it cleans off. If it keeps returning, the grade or finish may be wrong for the site.
Should I choose 304 or 316 stainless for bollards?
Choose 316 if the bollards are near the sea, a swimming pool or a road that is salted heavily; choose 304 for most other locations. The extra resistance of 316 to chlorides is what stops brown staining in those settings.