Devon · England
Steel security bollard installation in Exmouth
Steel security bollards supplied and fitted in Exmouth, Devon: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageSteel security bollards in Exmouth
Steel security bollards suit plenty of Exmouth sites, schools, small industrial units and filling-station forecourts among them. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
We work across EX8 and EX9 — Exmouth itself and places including Lympstone, Budleigh Salterton, Otterton and East Budleigh. Nearby, we also work in Exeter (9.2 miles), Newton Abbot (11 miles), Torquay (12 miles) and Paignton (14.5 miles), measured as the crow flies. Plymouth is around 37 miles away.
Key facts for this area
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for East Devon
- Postcodes
- EX8 and EX9
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Exeter (9.2 mi), Newton Abbot (11 mi), Torquay (12 mi), Paignton (14.5 mi)
Typical steel security bollards jobs in Exmouth
Typical reasons Exmouth sites choose steel security bollards:
- Grass verges and landscaped areas that vans keep driving over
- Stopping cut-through traffic on private roads and estates
- Lines between pedestrian routes and service yards
Guide prices for Exmouth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Exmouth
In Exmouth, work on adopted pavements and verges needs consent from Devon County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for East Devon) first — we flag this at survey.
Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround. Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
- Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.
What happens on site
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Choosing the right spec
| Option | Detail |
|---|---|
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
Pricing steel security bollards in Exmouth
When we price steel security bollards in Exmouth, these make the biggest difference:
- Surface reinstatement such as block paving or tarmac
- Finish: galvanised only or powder-coated
- Tube diameter, wall thickness and concrete infill
Keeping them working
A post that leans after a knock usually means the foundation has moved or cracked; it should be re-bedded or replaced rather than left as a trip or snag hazard. Galvanised steel posts need little attention for years at a time.
If posts in Exmouth are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Exmouth do you cover for steel security bollards?
We cover all of Exmouth (EX8 and EX9) and the rest of Devon. We also work in Exeter, Newton Abbot and Torquay.
Who gives permission for bollards on the pavement in Exmouth?
Devon County Council is the highway authority covering Exmouth's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do steel security bollards cost in Exmouth?
In Exmouth, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.