Lincolnshire · England
Steel security bollard installation in Boston
Planning steel security bollards in Boston? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageSteel security bollards in Boston
We supply and fit steel security bollards throughout Boston, typically for sites such as high street shopfronts, small industrial units and community car parks. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
We cover Boston's PE21, PE20 and PE22 postcode districts, including places such as Fishtoft, Hall Hills, Sutterton and Bicker. We also cover neighbouring Spalding (14.1 miles) and Skegness (19 miles) — distances are straight-line.
Key facts for this area
- Area
- Lincolnshire, England
- Highway authority
- Lincolnshire County Council (local roads)
- Planning authority
- the council for Boston
- Postcodes
- PE21, PE20 and PE22
- Guide price
- Typically £205–£925 per bollard + VAT (£245–£1,095 inc VAT for homes); minimum job £605
- Survey
- Free, with a fixed written quote
Guide prices for Boston
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£505 + VAT · £245–£605 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £415–£725 + VAT · £495–£865 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £635–£925 + VAT · £755–£1,095 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Steel security bollards in Boston: common uses
Around Boston, steel security bollards usually solve one of these:
- Protecting meter boxes, gas kiosks, pillars and corners
- Social housing estates with nuisance parking
- Forecourts and building entrances needing a visible boundary
Before we dig in Boston
The highway authority for local roads in Boston is Lincolnshire County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Boston need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Boston before posts go in.
Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock. Reinstatement matches the surface, whether tarmac, block paving, flags or turf.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
- Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.
Installation, step by step
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Choosing the right spec
| Option | Detail |
|---|---|
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
What affects the quote
When we price steel security bollards in Boston, these make the biggest difference:
- Surface reinstatement such as block paving or tarmac
- Root-fixed or base-plated installation
- Number of posts and length of the line
After installation
Galvanised steel posts need little attention for years at a time. Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather.
We can also service, repair or replace existing posts anywhere in Boston.
Common questions
Which parts of Boston do you cover for steel security bollards?
We cover all of Boston (PE21, PE20 and PE22) and the rest of Lincolnshire. We also work in Spalding and Skegness.
Who gives permission for bollards on the pavement in Boston?
Lincolnshire County Council is the highway authority covering Boston's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do steel security bollards cost in Boston?
In Boston, typically £205–£925 per bollard, supplied and installed, plus VAT (£245–£1,095 including VAT for homeowners), with a minimum job of £605 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
Are unrated steel bollards anti-ram?
No. They have not been crash-tested, so their performance against a deliberate vehicle attack is unknown. They are suited to nuisance parking and low-speed knocks; tested products are needed where an attack is the concern.