Lincolnshire · England
Steel security bollard installation in Cleethorpes
Steel security bollards for sites across Cleethorpes and the rest of Lincolnshire, from the first measurement to the last relaid paving block.
Computer-generated imageCleethorpes steel security bollards
In the town of Cleethorpes, steel security bollards tend to go in at schools, town-centre squares and community car parks. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
Coverage in Cleethorpes takes in the DN35 postcode district and nearby places like Humberston. Jobs in Cleethorpes can be combined with work in Grimsby (1.8 miles) (straight-line distances).
Cleethorpes at a glance
- Area
- Lincolnshire, England
- Highway authority
- North East Lincolnshire Council (local roads)
- Planning authority
- North East Lincolnshire Council
- Postcodes
- DN35
- Guide price
- Typically £185–£865 per bollard + VAT (£215–£1,045 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Grimsby (1.8 mi)
Steel security bollard prices in Cleethorpes
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£475 + VAT · £215–£565 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £395–£675 + VAT · £465–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £595–£865 + VAT · £705–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Typical steel security bollards jobs in Cleethorpes
Common uses in a place like Cleethorpes:
- Grass verges and landscaped areas that vans keep driving over
- Car park perimeters, end-of-bay protection and walkway edges
- Social housing estates with nuisance parking
Consents, ground and services in Cleethorpes
In Cleethorpes, work on adopted pavements and verges needs consent from North East Lincolnshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Cleethorpes is listed or inside a conservation area, check with the local planning authority (North East Lincolnshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround. Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
How the job runs
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Finishes and options
| Option | Detail |
|---|---|
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
Pricing steel security bollards in Cleethorpes
When we price steel security bollards in Cleethorpes, these make the biggest difference:
- Surface reinstatement such as block paving or tarmac
- Finish: galvanised only or powder-coated
- Number of posts and length of the line
After installation
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Galvanised steel posts need little attention for years at a time.
For damaged or loose posts in Cleethorpes, repairs and replacements are priced in writing first.
Common questions
Do you install steel security bollards in Cleethorpes?
We cover all of Cleethorpes (DN35) and the rest of Lincolnshire. We also work in Grimsby.
Do I need consent for steel security bollards on a public footway in Cleethorpes?
North East Lincolnshire Council is the highway authority covering Cleethorpes's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for steel security bollards in Cleethorpes?
In Cleethorpes, typically £185–£865 per bollard, supplied and installed, plus VAT (£215–£1,045 including VAT for homeowners), with a minimum job of £575 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Are unrated steel bollards anti-ram?
No. They have not been crash-tested, so their performance against a deliberate vehicle attack is unknown. They are suited to nuisance parking and low-speed knocks; tested products are needed where an attack is the concern.
Can new posts match our existing ones?
Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.