Surrey · England
Steel security bollard installation in Reigate
Local installation of steel security bollards in Reigate — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageReigate steel security bollards
Steel security bollards suit plenty of Reigate sites, small industrial units, filling-station forecourts and town-centre squares among them. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We cover Reigate's RH2 postcode district, including places such as Nalderswood and Sidlow. Nearby, we also work in Redhill (1.5 miles), Horley (4.8 miles), Banstead (5.9 miles) and Caterham (6.3 miles), measured as the crow flies. Brighton is around 28 miles away.
Reigate at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH2
- Guide price
- Typically £205–£945 per bollard + VAT (£245–£1,145 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Reigate: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£515 + VAT · £245–£615 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£745 + VAT · £505–£885 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £655–£945 + VAT · £785–£1,145 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where steel security bollards go in around Reigate
Common uses in a place like Reigate:
- Protecting meter boxes, gas kiosks, pillars and corners
- Social housing estates with nuisance parking
- Lines between pedestrian routes and service yards
Consents, ground and services in Reigate
The highway authority for local roads in Reigate is Surrey County Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Reigate need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Reigate and Banstead before posts go in.
Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging. Reinstatement matches the surface, whether tarmac, block paving, flags or turf.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
Installation, step by step
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Specification choices
| Option | Detail |
|---|---|
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
Pricing steel security bollards in Reigate
Our South East guide prices are a starting point; the survey in Reigate firms them up. What tends to move them:
- Finish: galvanised only or powder-coated
- Tube diameter, wall thickness and concrete infill
- Root-fixed or base-plated installation
After installation
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Galvanised steel posts need little attention for years at a time.
We can also service, repair or replace existing posts anywhere in Reigate.
Steel security bollards in Reigate: FAQs
Can you install steel security bollards anywhere in Reigate?
We cover all of Reigate (RH2) and the rest of Surrey. We also work in Redhill, Horley and Banstead.
Who gives permission for bollards on the pavement in Reigate?
In Reigate, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for steel security bollards in Reigate?
In Reigate, typically £205–£945 per bollard, supplied and installed, plus VAT (£245–£1,145 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can new posts match our existing ones?
Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.
Should I choose root-fixed or base-plated steel bollards?
Root-fixed where you can dig and want the stronger post; base-plated where there is a sound slab and you want quick installation or the option to remove posts later. Base plates are limited by the slab and anchors, so they are not the right choice where vehicles hit hard.