Dorset · England
Telescopic bollard installation in Poole
Local installation of telescopic bollards in Poole — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Poole
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Poole, that tends to mean sites such as housing association car parks, high streets and retail parks.
We cover the BH15, BH14, BH17, BH13, BH12 and BH18 postcode districts in Poole. We also cover neighbouring Bournemouth (4.6 miles), Christchurch (9 miles), New Milton (14.2 miles) and Weymouth (21.9 miles) — distances are straight-line. It sits roughly 29 miles from Southampton as the crow flies.
Local details
- Area
- Dorset, England
- Highway authority
- Bournemouth, Christchurch and Poole Council (local roads)
- Planning authority
- Bournemouth, Christchurch and Poole Council
- Postcodes
- BH15, BH14, BH17, BH13, BH12 and BH18
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Bournemouth (4.6 mi), Christchurch (9 mi), New Milton (14.2 mi), Weymouth (21.9 mi)
Typical telescopic bollards jobs in Poole
Typical reasons Poole sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Access roads closed outside working hours
- Shared drives that need occasional closing
Telescopic bollard prices in Poole
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Poole
Bournemouth, Christchurch and Poole Council is the highway authority covering Poole's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Poole is listed or inside a conservation area, check with the local planning authority (Bournemouth, Christchurch and Poole Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Poole
Our South West guide prices are a starting point; the survey in Poole firms them up. What tends to move them:
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
Looking after them
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Poole, repairs and replacements are priced in writing first.
Common questions
Which parts of Poole do you cover for telescopic bollards?
We cover all of Poole (BH15, BH14, BH17, BH13, BH12 and BH18) and the rest of Dorset. We also work in Bournemouth, Christchurch and New Milton.
Who gives permission for bollards on the pavement in Poole?
In Poole, work on adopted pavements and verges needs consent from Bournemouth, Christchurch and Poole Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Poole?
In Poole, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.