East Lothian · Scotland
Telescopic bollard installation in Dunbar
Planning telescopic bollards in Dunbar? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout telescopic bollards in Dunbar
Whether it's local parades, small industrial units and filling-station forecourts, telescopic bollards in Dunbar are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across EH42 and EH40 — Dunbar itself and places including West Barns, Innerwick, Spott and Whitekirk. We also cover neighbouring Tranent (17.4 miles) and Musselburgh (21.1 miles) — distances are straight-line. Edinburgh is around 27 miles away.
Local details
- Area
- East Lothian, Scotland
- Roads authority
- East Lothian Council (local roads)
- Planning authority
- East Lothian Council
- Postcodes
- EH42 and EH40
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Tranent (17.4 mi), Musselburgh (21.1 mi)
What telescopic bollards cost in Dunbar
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Telescopic bollards in Dunbar: common uses
Typical reasons Dunbar sites choose telescopic bollards:
- Allocated parking bays in flats and private developments
- Domestic driveways where the bollard is used daily
- Car parks where a removable post would go missing
Before we dig in Dunbar
For anything on the public footway in Dunbar we check with the roads authority first — East Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at East Lothian Council can confirm before anything is ordered.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
How the job runs
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Dunbar
Our Scotland guide prices are a starting point; the survey in Dunbar firms them up. What tends to move them:
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
- Surface type and quality of reinstatement
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
If posts in Dunbar are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install telescopic bollards in Dunbar?
We cover all of Dunbar (EH42 and EH40) and the rest of East Lothian. We also work in Tranent and Musselburgh.
Who gives permission for bollards on the pavement in Dunbar?
For anything on the public footway in Dunbar we check with the roads authority first — East Lothian Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for telescopic bollards in Dunbar?
In Dunbar, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.