East Lothian · Scotland
Removable bollard installation in Dunbar
Removable bollards for sites across Dunbar and the rest of East Lothian, from the first measurement to the last relaid paving block.
Computer-generated imageDunbar removable bollards
Whether it's small industrial units, schools and filling-station forecourts, removable bollards in Dunbar are planned around who needs to get through and who doesn't. Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points.
Coverage in Dunbar takes in the EH42 and EH40 postcode districts and nearby places like West Barns, Innerwick, Spott and Whitekirk. We also cover neighbouring Tranent (17.4 miles) and Musselburgh (21.1 miles) — distances are straight-line. It sits roughly 27 miles from Edinburgh as the crow flies.
Dunbar at a glance
- Area
- East Lothian, Scotland
- Roads authority
- East Lothian Council (local roads)
- Planning authority
- East Lothian Council
- Postcodes
- EH42 and EH40
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Tranent (17.4 mi), Musselburgh (21.1 mi)
Guide prices for Dunbar
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical removable bollards jobs in Dunbar
Common uses in a place like Dunbar:
- Emergency and fire service access routes
- School gates closed during drop-off and pick-up
- Delivery bays in pedestrian areas and shop frontages
What we check first in Dunbar
In Scotland the council is the roads authority for local roads, which in Dunbar means East Lothian Council. Removable bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Dunbar is listed or inside a conservation area, check with the local planning authority (East Lothian Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On thin tarmac drives, the surround is sized so the socket does not loosen over time. On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Check whether the location is public highway; a roads authority agreement is usually needed there.
What happens on site
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Specification choices
| Option | Detail |
|---|---|
| Socket lids | Spring-closing, hinged or lockable lids that sit flush when the post is removed, so there is no open hole. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
Pricing removable bollards in Dunbar
Two Dunbar jobs with the same number of posts can price quite differently. The usual reasons:
- Post material: steel, stainless or aluminium
- Rated removable posts where security is required
- Surface type and reinstatement
Looking after them
Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out. If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard.
If posts in Dunbar are later hit or damaged, we can repair or replace them — see bollard repairs.
Removable bollards in Dunbar: FAQs
Can you install removable bollards anywhere in Dunbar?
We cover all of Dunbar (EH42 and EH40) and the rest of East Lothian. We also work in Tranent and Musselburgh.
Do I need consent for removable bollards on a public footway in Dunbar?
Dunbar falls under East Lothian Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for removable bollards in Dunbar?
In Dunbar, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.