East Riding of Yorkshire · England
Telescopic bollard installation in Hull
Planning telescopic bollards in Hull? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout telescopic bollards in Hull
We supply and fit telescopic bollards throughout Hull, typically for sites such as office forecourts, pedestrianised streets and city-centre plazas. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover the HU1, HU2, HU3, HU5, HU9 and HU8 postcode districts in Hull. Nearby, we also work in Beverley (7.9 miles), measured as the crow flies.
Hull at a glance
- Area
- East Riding of Yorkshire, England
- Highway authority
- Hull City Council (local roads)
- Planning authority
- Hull City Council
- Postcodes
- HU1, HU2, HU3, HU5, HU9, HU8, HU4 and HU6
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Beverley (7.9 mi)
Hull: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Hull
Common uses in a place like Hull:
- Allocated parking bays in flats and private developments
- Shared drives that need occasional closing
- Commercial yards where posts must not be left lying around
Permissions and groundwork in Hull
In Hull, work on adopted pavements and verges needs consent from Hull City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Hull need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Hull City Council before posts go in.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Hull
Our Yorkshire and the Humber guide prices are a starting point; the survey in Hull firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
- Post size and whether lift assistance is wanted
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
We can also service, repair or replace existing posts anywhere in Hull.
Common questions
Can you install telescopic bollards anywhere in Hull?
We cover all of Hull (HU1, HU2, HU3, HU5, HU9 and HU8) and the rest of East Riding of Yorkshire. We also work in Beverley.
Who gives permission for bollards on the pavement in Hull?
In Hull, work on adopted pavements and verges needs consent from Hull City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Hull?
In Hull, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.