Bollard Installers

Gloucestershire · England

Telescopic bollard installation in Cirencester

Telescopic bollards for sites across Cirencester and the rest of Gloucestershire, from the first measurement to the last relaid paving block.

Telescopic security bollard part-lowered into its ground cassette on a block-paved driveway in front of a house garageComputer-generated image

Telescopic bollards in Cirencester

In the town of Cirencester, telescopic bollards tend to go in at residential driveways, high street shopfronts and filling-station forecourts. Because the post stays in its cassette, there is nothing to store and nothing to lose.

We cover Cirencester's GL7 postcode district, including places such as Fairford, South Cerney, Lechlade-on-Thames and Kempsford. We also cover neighbouring Stroud (10 miles), Cheltenham (13.3 miles), Swindon (13.8 miles) and Gloucester (15.4 miles) — distances are straight-line. It sits roughly 14 miles from Swindon as the crow flies.

Local details

Area
Gloucestershire, England
Highway authority
Gloucestershire County Council (local roads)
Planning authority
the council for Cotswold
Postcodes
GL7
Guide price
Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
Survey
Free, with a fixed written quote
Nearby
Stroud (10 mi), Cheltenham (13.3 mi), Swindon (13.8 mi), Gloucester (15.4 mi)

Guide prices for Cirencester

SpecificationGuide priceIncludes
Standard£345–£705 + VAT · £405–£845 inc VATStandard post, foundation, reinstatement
Upgraded£605–£955 + VAT · £725–£1,145 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£855–£1,195 + VAT · £1,045–£1,445 inc VATHeavy-duty or architectural spec, premium finish

Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

Where telescopic bollards go in around Cirencester

Common uses in a place like Cirencester:

  • Access roads closed outside working hours
  • Allocated parking bays in flats and private developments
  • Commercial yards where posts must not be left lying around

Consents, ground and services in Cirencester

The highway authority for local roads in Cirencester is Gloucestershire County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

If your site in Cirencester is listed or inside a conservation area, check with the local planning authority (the council for Cotswold) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.

Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Positions are scanned and hand-dug before committing.

  • Connect drainage only to surface water systems or a soakaway, never to a foul drain.
  • Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.

Installation, step by step

Check depth and drainage

The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.

Cut and excavate

The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.

Reinstate and test

The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.

Specification choices

OptionDetail
Lid and head designsFlush hinged lids, removable caps or integrated heads that close the cassette top when lowered.
Lock typesKeyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post.
Standard or lift-assistedLift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use.

What moves the price in Cirencester

Our South West guide prices are a starting point; the survey in Cirencester firms them up. What tends to move them:

  • Excavation depth and the presence of services under the drive
  • Drainage: simple soakaway or a connection to a drain
  • Number of posts and keyed-alike locks

After installation

If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.

For damaged or loose posts in Cirencester, repairs and replacements are priced in writing first.

Questions about telescopic bollards in Cirencester

Do you install telescopic bollards in Cirencester?

We cover all of Cirencester (GL7) and the rest of Gloucestershire. We also work in Stroud, Cheltenham and Swindon.

Who gives permission for bollards on the pavement in Cirencester?

The highway authority for local roads in Cirencester is Gloucestershire County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

What's a typical price for telescopic bollards in Cirencester?

In Cirencester, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.

What if it freezes in winter?

Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.

How deep does a telescopic bollard go into the ground?

Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.

Telescopic bollards in nearby towns

More from us in Cirencester

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote