Gloucestershire · England
Timber bollard installation in Cirencester
Timber bollards for sites across Cirencester and the rest of Gloucestershire, from the first measurement to the last relaid paving block.
Computer-generated imageCirencester timber bollards
In the town of Cirencester, timber bollards tend to go in at community buildings, small industrial units and community car parks. Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages.
We cover Cirencester's GL7 postcode district, including places such as Fairford, South Cerney, Lechlade-on-Thames and Kempsford. We also cover neighbouring Stroud (10 miles), Cheltenham (13.3 miles), Swindon (13.8 miles) and Gloucester (15.4 miles) — distances are straight-line. Cirencester is about 14 miles from Swindon.
Local details
- Area
- Gloucestershire, England
- Highway authority
- Gloucestershire County Council (local roads)
- Planning authority
- the council for Cotswold
- Postcodes
- GL7
- Guide price
- Typically £95–£345 per post + VAT (£105–£405 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Stroud (10 mi), Cheltenham (13.3 mi), Swindon (13.8 mi), Gloucester (15.4 mi)
What Cirencester sites use timber bollards for
Typical reasons Cirencester sites choose timber bollards:
- Country parks, nature reserves and woodland car parks
- School frontages and nursery entrances
- Landscaped car parks and picnic areas
Cirencester: typical timber bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£275 + VAT · £205–£325 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £245–£345 + VAT · £285–£405 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Cirencester
The highway authority for local roads in Cirencester is Gloucestershire County Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Cirencester is listed or inside a conservation area, check with the local planning authority (the council for Cotswold) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening. Verges on rural lanes and estates often carry water mains, telecoms cables and drainage, so services are checked before augering.
- Fit reflective bands or white tops where posts stand beside roads or in unlit car parks.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
From survey to handover
Dig the holes
Holes are dug by hand or auger to the required depth, avoiding roots and checking for services along verges and footpaths.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Choosing the right spec
| Option | Detail |
|---|---|
| Removable and lockable posts | Timber posts in steel sockets, or hinged timber posts, for maintenance and emergency access. |
| Oak | Naturally durable heartwood that weathers to silver-grey. Suits parks, heritage settings and visible frontages. |
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
What moves the price in Cirencester
Our South West guide prices are a starting point; the survey in Cirencester firms them up. What tends to move them:
- Post size and length
- Fixing method: stone, concrete or steel shoe
- Removable or hinged posts for access
Looking after them
Inspect posts at ground level, where rot starts, by probing for soft wood. Re-treat cut or damaged softwood, keep grass and soil from building up around the base, and replace posts that are soft at the ground line before they snap.
If posts in Cirencester are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about timber bollards in Cirencester
Which parts of Cirencester do you cover for timber bollards?
We cover all of Cirencester (GL7) and the rest of Gloucestershire. We also work in Stroud, Cheltenham and Swindon.
Do I need consent for timber bollards on a public footway in Cirencester?
The highway authority for local roads in Cirencester is Gloucestershire County Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for timber bollards in Cirencester?
In Cirencester, typically £95–£345 per post, supplied and installed, plus VAT (£105–£405 including VAT for homeowners), with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Is tropical hardwood a sustainable choice?
It can be, if it comes from certified sustainable sources. Ask for certification with the order. Oak and treated softwood from managed forests are alternatives.
How long will a timber bollard last in the ground?
It depends on species, treatment and how the post is set. Dense hardwoods and oak heartwood last much longer than softwood, and posts that are kept out of standing water last longer than those sitting in wet concrete. A steel shoe that keeps timber off the ground extends life considerably.
Timber bollards in nearby towns
- Stroud (10 mi)
- Cheltenham (13.3 mi)
- Swindon (13.8 mi)
- Gloucester (15.4 mi)
- Chippenham (19.1 mi)
- Tewkesbury (20.5 mi)