Greater Manchester · England
Telescopic bollard installation in Heywood
Telescopic bollards for sites across Heywood and the rest of Greater Manchester, from the first measurement to the last relaid paving block.
Computer-generated imageHeywood telescopic bollards
Whether it's local parades, residential driveways and community car parks, telescopic bollards in Heywood are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover every part of Heywood in the OL10 postcode district. We also cover neighbouring Middleton (3 miles), Rochdale (3.2 miles), Bury (3.3 miles) and Royton (4.4 miles) — distances are straight-line. Oldham is around 5 miles away.
Heywood at a glance
- Area
- Greater Manchester, England
- Highway authority
- Rochdale Council (local roads)
- Planning authority
- Rochdale Council
- Postcodes
- OL10
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Typical telescopic bollards jobs in Heywood
Typical reasons Heywood sites choose telescopic bollards:
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
- Car parks where a removable post would go missing
Heywood: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Heywood
Rochdale Council is the highway authority covering Heywood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Heywood is listed or inside a conservation area, check with the local planning authority (Rochdale Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
Pricing telescopic bollards in Heywood
When we price telescopic bollards in Heywood, these make the biggest difference:
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Lubricate the lock with a suitable spray, especially before winter.
If posts in Heywood are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about telescopic bollards in Heywood
Do you install telescopic bollards in Heywood?
We cover all of Heywood (OL10) and the rest of Greater Manchester. We also work in Middleton, Rochdale and Bury.
Who gives permission for bollards on the pavement in Heywood?
In Heywood, work on adopted pavements and verges needs consent from Rochdale Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Heywood?
In Heywood, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.