Hampshire · England
Telescopic bollard installation in Bordon
Planning telescopic bollards in Bordon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout telescopic bollards in Bordon
In the town of Bordon, telescopic bollards tend to go in at residential driveways, community buildings and high street shopfronts. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Bordon takes in the GU35, GU30, GU33 and GU34 postcode districts and nearby places like Headley Down, Lindford, Arford and Standford. We also cover neighbouring Farnham (7.5 miles), Aldershot (10.2 miles), Fleet (11.8 miles) and Godalming (11.8 miles) — distances are straight-line. Bordon is about 24 miles from Portsmouth.
Bordon at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for East Hampshire
- Postcodes
- GU35, GU30, GU33 and GU34
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
Telescopic bollards in Bordon: common uses
Typical reasons Bordon sites choose telescopic bollards:
- Access roads closed outside working hours
- Shared drives that need occasional closing
- Commercial yards where posts must not be left lying around
Guide prices for Bordon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Bordon
In Bordon, work on adopted pavements and verges needs consent from Hampshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Bordon is listed or inside a conservation area, check with the local planning authority (the council for East Hampshire) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
Installation, step by step
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Bordon
Two Bordon jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Drainage: simple soakaway or a connection to a drain
- Post size and whether lift assistance is wanted
Looking after them
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Bordon.
Common questions
Do you install telescopic bollards in Bordon?
We cover all of Bordon (GU35, GU30, GU33 and GU34) and the rest of Hampshire. We also work in Farnham, Aldershot and Fleet.
Who gives permission for bollards on the pavement in Bordon?
Hampshire County Council is the highway authority covering Bordon's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Bordon?
In Bordon, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards near Bordon
- Farnham (7.5 mi)
- Aldershot (10.2 mi)
- Fleet (11.8 mi)
- Godalming (11.8 mi)
- Farnborough (13.3 mi)
- Basingstoke (14.2 mi)