Herefordshire · England
Telescopic bollard installation in Hereford
Telescopic bollards for sites across Hereford and the rest of Herefordshire, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Hereford
Across Hereford, typical sites for telescopic bollards include high street shopfronts, schools and community car parks. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Hereford's HR1, HR4 and HR2 postcode districts, including places such as Bartestree, Sutton St Nicholas, Fownhope and Bodenham. We also cover neighbouring Leominster (11.7 miles) and Great Malvern (17 miles) — distances are straight-line.
Key facts for this area
- Area
- Herefordshire, England
- Highway authority
- Herefordshire Council (local roads)
- Planning authority
- Herefordshire Council
- Postcodes
- HR1, HR4 and HR2
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Leominster (11.7 mi), Great Malvern (17 mi)
Guide prices for Hereford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Hereford
Typical reasons Hereford sites choose telescopic bollards:
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
- Allocated parking bays in flats and private developments
Consents, ground and services in Hereford
The highway authority for local roads in Hereford is Herefordshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Hereford is listed or inside a conservation area, check with the local planning authority (Herefordshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
From survey to handover
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
Pricing telescopic bollards in Hereford
Our West Midlands guide prices are a starting point; the survey in Hereford firms them up. What tends to move them:
- Number of posts and keyed-alike locks
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
Keeping them working
Lubricate the lock with a suitable spray, especially before winter. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
We can also service, repair or replace existing posts anywhere in Hereford.
Questions about telescopic bollards in Hereford
Do you install telescopic bollards in Hereford?
We cover all of Hereford (HR1, HR4 and HR2) and the rest of Herefordshire. We also work in Leominster and Great Malvern.
Do I need consent for telescopic bollards on a public footway in Hereford?
In Hereford, work on adopted pavements and verges needs consent from Herefordshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Hereford?
In Hereford, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.