Inverclyde · Scotland
Telescopic bollard installation in Greenock
Telescopic bollards for sites across Greenock and the rest of Inverclyde, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Greenock
We supply and fit telescopic bollards throughout Greenock, typically for sites such as high street shopfronts, filling-station forecourts and community buildings. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Greenock's PA15 and PA16 postcode districts, including places such as Inverkip. Nearby, we also work in Gourock (2.4 miles), Port Glasgow (2.9 miles), Largs (11.2 miles) and Erskine (12.5 miles), measured as the crow flies. Glasgow is around 20 miles away.
Local details
- Area
- Inverclyde, Scotland
- Roads authority
- Inverclyde Council (local roads)
- Planning authority
- Inverclyde Council
- Postcodes
- PA15 and PA16
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Gourock (2.4 mi), Port Glasgow (2.9 mi), Largs (11.2 mi), Erskine (12.5 mi)
Telescopic bollard prices in Greenock
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where telescopic bollards go in around Greenock
Typical reasons Greenock sites choose telescopic bollards:
- Shared drives that need occasional closing
- Commercial yards where posts must not be left lying around
- Access roads closed outside working hours
Before we dig in Greenock
Greenock falls under Inverclyde Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
If your site in Greenock is listed or inside a conservation area, check with the local planning authority (Inverclyde Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
Pricing telescopic bollards in Greenock
Two Greenock jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Number of posts and keyed-alike locks
- Drainage: simple soakaway or a connection to a drain
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Lubricate the lock with a suitable spray, especially before winter.
We can also service, repair or replace existing posts anywhere in Greenock.
Questions about telescopic bollards in Greenock
Can you install telescopic bollards anywhere in Greenock?
We cover all of Greenock (PA15 and PA16) and the rest of Inverclyde. We also work in Gourock, Port Glasgow and Largs.
Who gives permission for bollards on the pavement in Greenock?
Greenock falls under Inverclyde Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do telescopic bollards cost in Greenock?
In Greenock, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards in nearby towns
- Gourock (2.4 mi)
- Port Glasgow (2.9 mi)
- Largs (11.2 mi)
- Erskine (12.5 mi)
- Johnstone (12.6 mi)
- Clydebank (14.1 mi)