Renfrewshire · Scotland
Telescopic bollard installation in Johnstone
Telescopic bollards for sites across Johnstone and the rest of Renfrewshire, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Johnstone
We supply and fit telescopic bollards throughout Johnstone, typically for sites such as high street shopfronts, small industrial units and community buildings. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Johnstone takes in the PA5, PA10, PA9, PA6, PA11 and PA12 postcode districts and nearby places like Elderslie, Brookfield, Kilbarchan and Howwood. We also cover neighbouring Paisley (3.2 miles), Barrhead (5.2 miles), Erskine (5.6 miles) and Renfrew (5.6 miles) — distances are straight-line. Johnstone is about 10 miles from Glasgow.
Local details
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA5, PA10, PA9, PA6, PA11 and PA12
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Where telescopic bollards go in around Johnstone
Common uses in a place like Johnstone:
- Shared drives that need occasional closing
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
Guide prices for Johnstone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Johnstone
In Scotland the council is the roads authority for local roads, which in Johnstone means Renfrewshire Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Many private-land installations in Johnstone need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Renfrewshire Council before posts go in.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
What affects the quote
Two Johnstone jobs with the same number of posts can price quite differently. The usual reasons:
- Post size and whether lift assistance is wanted
- Drainage: simple soakaway or a connection to a drain
- Excavation depth and the presence of services under the drive
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
If posts in Johnstone are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Johnstone do you cover for telescopic bollards?
We cover all of Johnstone (PA5, PA10, PA9, PA6, PA11 and PA12) and the rest of Renfrewshire. We also work in Paisley, Barrhead and Erskine.
Do I need consent for telescopic bollards on a public footway in Johnstone?
For anything on the public footway in Johnstone we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for telescopic bollards in Johnstone?
In Johnstone, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Telescopic bollards near Johnstone
- Paisley (3.2 mi)
- Barrhead (5.2 mi)
- Erskine (5.6 mi)
- Renfrew (5.6 mi)
- Clydebank (6.6 mi)
- Newton Mearns (8.1 mi)