London · England
Telescopic bollard installation in Harrow
Telescopic bollards supplied and fitted in Harrow, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Harrow
Across Harrow, typical sites for telescopic bollards include school gates, places of worship and hospital approaches. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across HA1, HA2, HA3, HA7 and HA5 — Harrow itself and places including Stanmore. Nearby, we also work in Brent (3.4 miles), Bushey (3.4 miles), Borehamwood (4.8 miles) and Watford (4.8 miles), measured as the crow flies.
Key facts for this area
- Area
- London, England
- Highway authority
- Harrow Council (local roads)
- Planning authority
- Harrow Council
- Postcodes
- HA1, HA2, HA3, HA7 and HA5
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £735
- Survey
- Free, with a fixed written quote
- Nearby
- Brent (3.4 mi), Bushey (3.4 mi), Borehamwood (4.8 mi), Watford (4.8 mi)
What Harrow sites use telescopic bollards for
Around Harrow, telescopic bollards usually solve one of these:
- Domestic driveways where the bollard is used daily
- Allocated parking bays in flats and private developments
- Sites with no power for automatic bollards
Telescopic bollard prices in Harrow
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
What we check first in Harrow
In Harrow, work on adopted pavements and verges needs consent from Harrow Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Harrow Council) first — we flag this at survey.
Positions are scanned and hand-dug before committing. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
What affects the quote
When we price telescopic bollards in Harrow, these make the biggest difference:
- Surface type and quality of reinstatement
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
For damaged or loose posts in Harrow, repairs and replacements are priced in writing first.
Common questions
Which parts of Harrow do you cover for telescopic bollards?
We cover all of Harrow (HA1, HA2, HA3, HA7 and HA5) and the rest of London. We also work in Brent, Bushey and Borehamwood.
Do I need consent for telescopic bollards on a public footway in Harrow?
In Harrow, work on adopted pavements and verges needs consent from Harrow Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Harrow?
In Harrow, typically £395–£1,395 per bollard with cassette, supplied and installed, plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £735 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.