London · England
Telescopic bollard installation in Brent
Planning telescopic bollards in Brent? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageTelescopic bollards in Brent
Telescopic bollards suit plenty of Brent sites, mews courtyards, hospital approaches and office entrances among them. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across HA9, HA0, NW9, NW10 and NW2 — Brent itself and places including Wembley and Willesden. We also cover neighbouring Ealing (3.1 miles), Harrow (3.4 miles), Barnet (4.3 miles) and Hammersmith and Fulham (4.9 miles) — distances are straight-line.
Local details
- Area
- London, England
- Highway authority
- Brent Council (local roads)
- Planning authority
- Brent Council
- Postcodes
- HA9, HA0, NW9, NW10 and NW2
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £735
- Survey
- Free, with a fixed written quote
- Nearby
- Ealing (3.1 mi), Harrow (3.4 mi), Barnet (4.3 mi), Hammersmith and Fulham (4.9 mi)
What Brent sites use telescopic bollards for
Typical reasons Brent sites choose telescopic bollards:
- Car parks where a removable post would go missing
- Access roads closed outside working hours
- Sites with no power for automatic bollards
What telescopic bollards cost in Brent
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Permissions and groundwork in Brent
The highway authority for local roads in Brent is Brent Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Brent Council) first — we flag this at survey.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Positions are scanned and hand-dug before committing.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Brent
When we price telescopic bollards in Brent, these make the biggest difference:
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
- Surface type and quality of reinstatement
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Brent.
Telescopic bollards in Brent: FAQs
Can you install telescopic bollards anywhere in Brent?
We cover all of Brent (HA9, HA0, NW9, NW10 and NW2) and the rest of London. We also work in Ealing, Harrow and Barnet.
Do I need consent for telescopic bollards on a public footway in Brent?
In Brent, work on adopted pavements and verges needs consent from Brent Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Brent?
In Brent, typically £395–£1,395 per bollard with cassette, supplied and installed, plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £735 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Telescopic bollards near Brent
- Ealing (3.1 mi)
- Harrow (3.4 mi)
- Barnet (4.3 mi)
- Hammersmith and Fulham (4.9 mi)
- Camden (5.1 mi)
- Kensington and Chelsea (5.3 mi)