London · England
Ram-raid protection bollards in Brent
Local installation of ram-raid bollards in Brent — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout ram-raid bollards in Brent
Across Brent, typical sites for ram-raid bollards include station forecourts, shopping parades and places of worship. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across HA9, HA0, NW9, NW10 and NW2 — Brent itself and places including Wembley and Willesden. We also cover neighbouring Ealing (3.1 miles), Harrow (3.4 miles), Barnet (4.3 miles) and Hammersmith and Fulham (4.9 miles) — distances are straight-line.
Key facts for this area
- Area
- London, England
- Highway authority
- Brent Council (local roads)
- Planning authority
- Brent Council
- Postcodes
- HA9, HA0, NW9, NW10 and NW2
- Guide price
- Typically £455–£1,695 per bollard + VAT; minimum job £1,095
- Survey
- Free, with a fixed written quote
- Nearby
- Ealing (3.1 mi), Harrow (3.4 mi), Barnet (4.3 mi), Hammersmith and Fulham (4.9 mi)
Ram-raid bollards in Brent: common uses
Typical reasons Brent sites choose ram-raid bollards:
- Through-the-wall and freestanding ATMs
- Pharmacies and late-opening premises
- Convenience stores and off-licences with glazed frontages
What ram-raid bollards cost in Brent
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £455–£985 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £835–£1,345 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,195–£1,695 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
What we check first in Brent
In Brent, work on adopted pavements and verges needs consent from Brent Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in Brent is listed or inside a conservation area, check with the local planning authority (Brent Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
What moves the price in Brent
Two Brent jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts across the frontage or ATM
- Reinstatement of forecourt or natural stone surfaces
- Unrated, PAS 170-1 or crash-rated product
After installation
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
For damaged or loose posts in Brent, repairs and replacements are priced in writing first.
Questions about ram-raid bollards in Brent
Which parts of Brent do you cover for ram-raid bollards?
We cover all of Brent (HA9, HA0, NW9, NW10 and NW2) and the rest of London. We also work in Ealing, Harrow and Barnet.
Do I need consent for ram-raid bollards on a public footway in Brent?
In Brent, work on adopted pavements and verges needs consent from Brent Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do ram-raid bollards cost in Brent?
In Brent, typically £455–£1,695 per bollard, supplied and installed, plus VAT, with a minimum job of £1,095 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards near Brent
- Ealing (3.1 mi)
- Harrow (3.4 mi)
- Barnet (4.3 mi)
- Hammersmith and Fulham (4.9 mi)
- Camden (5.1 mi)
- Kensington and Chelsea (5.3 mi)