London · England
Ram-raid protection bollards in Barnet
Planning ram-raid bollards in Barnet? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout ram-raid bollards in Barnet
In the borough of Barnet, ram-raid bollards tend to go in at places of worship, office entrances and hospital approaches. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across EN5, EN4, NW7, N3, N12 and NW4 — Barnet itself and places including Kitts End, Rowley Green, Edgware and Finchley. Nearby, we also work in Borehamwood (4.1 miles), Brent (4.3 miles), Haringey (4.8 miles) and Camden (5.2 miles), measured as the crow flies.
Barnet at a glance
- Area
- London, England
- Highway authority
- Barnet Council (local roads)
- Planning authority
- Barnet Council
- Postcodes
- EN5, EN4, NW7, N3, N12, NW4, N20 and N2
- Guide price
- Typically £455–£1,695 per bollard + VAT; minimum job £1,095
- Survey
- Free, with a fixed written quote
- Nearby
- Borehamwood (4.1 mi), Brent (4.3 mi), Haringey (4.8 mi), Camden (5.2 mi)
Barnet: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £455–£985 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £835–£1,345 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,195–£1,695 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
What Barnet sites use ram-raid bollards for
Around Barnet, ram-raid bollards usually solve one of these:
- Premises that have already been targeted once
- Pharmacies and late-opening premises
- Filling station kiosks and forecourt shops
What we check first in Barnet
In Barnet, work on adopted pavements and verges needs consent from Barnet Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in Barnet is listed or inside a conservation area, check with the local planning authority (Barnet Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Deep foundations need care near the building's own footings and basement walls. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
What happens on site
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Finishes and options
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What affects the quote
Two Barnet jobs with the same number of posts can price quite differently. The usual reasons:
- Foundation depth and what is found under the pavement
- Unrated, PAS 170-1 or crash-rated product
- Reinstatement of forecourt or natural stone surfaces
Keeping them working
Ram-raid bollards are robust but not maintenance-free. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
We can also service, repair or replace existing posts anywhere in Barnet.
Common questions
Which parts of Barnet do you cover for ram-raid bollards?
We cover all of Barnet (EN5, EN4, NW7, N3, N12 and NW4) and the rest of London. We also work in Borehamwood, Brent and Haringey.
Do I need consent for ram-raid bollards on a public footway in Barnet?
The highway authority for local roads in Barnet is Barnet Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for ram-raid bollards in Barnet?
In Barnet, typically £455–£1,695 per bollard, supplied and installed, plus VAT, with a minimum job of £1,095 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards in nearby towns
- Borehamwood (4.1 mi)
- Brent (4.3 mi)
- Haringey (4.8 mi)
- Camden (5.2 mi)
- Harrow (5.5 mi)
- Potters Bar (5.8 mi)