Scottish Borders · Scotland
Telescopic bollard installation in Hawick
Telescopic bollards supplied and fitted in Hawick, Scottish Borders: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageHawick telescopic bollards
Across Hawick, typical sites for telescopic bollards include filling-station forecourts, community buildings and high street shopfronts. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Hawick takes in the TD9 postcode district and nearby places like Denholm and Bonchester Bridge. We also cover neighbouring Galashiels (13.3 miles) — distances are straight-line. Hawick is about 40 miles from Edinburgh.
Hawick at a glance
- Area
- Scottish Borders, Scotland
- Roads authority
- Scottish Borders Council (local roads)
- Planning authority
- Scottish Borders Council
- Postcodes
- TD9
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Galashiels (13.3 mi)
Where telescopic bollards go in around Hawick
Around Hawick, telescopic bollards usually solve one of these:
- Car parks where a removable post would go missing
- Sites with no power for automatic bollards
- Access roads closed outside working hours
Hawick: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Hawick
In Scotland the council is the roads authority for local roads, which in Hawick means Scottish Borders Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Scottish Borders Council can confirm before anything is ordered.
Positions are scanned and hand-dug before committing. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Hawick firms them up. What tends to move them:
- Stainless or powder-coated finish
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Hawick.
Common questions
Which parts of Hawick do you cover for telescopic bollards?
We cover all of Hawick (TD9) and the rest of Scottish Borders. We also work in Galashiels.
Who gives permission for bollards on the pavement in Hawick?
For anything on the public footway in Hawick we check with the roads authority first — Scottish Borders Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for telescopic bollards in Hawick?
In Hawick, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.