London · England
Timber bollard installation in Bexley
Timber bollards supplied and fitted in Bexley, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageBexley timber bollards
Across Bexley, typical sites for timber bollards include places of worship, office entrances and station forecourts. Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages.
We work across DA5, DA7, DA6, DA16, DA8 and DA17 — Bexley itself and places including Coldblow, Sidcup and Erith. Nearby, we also work in Dartford (3.2 miles), Greenwich (4.2 miles), Swanley (4.6 miles) and Barking and Dagenham (6.6 miles), measured as the crow flies.
Key facts for this area
- Area
- London, England
- Highway authority
- Bexley Council (local roads)
- Planning authority
- Bexley Council
- Postcodes
- DA5, DA7, DA6, DA16, DA8, DA17, DA18 and DA15
- Guide price
- Typically £105–£365 per post + VAT (£125–£435 inc VAT for homes); minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Dartford (3.2 mi), Greenwich (4.2 mi), Swanley (4.6 mi), Barking and Dagenham (6.6 mi)
Timber bollard prices in Bexley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £105–£215 + VAT · £125–£255 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £185–£295 + VAT · £215–£345 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £265–£365 + VAT · £315–£435 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where timber bollards go in around Bexley
Common uses in a place like Bexley:
- Village greens and recreation grounds
- Footpath and bridleway entrances
- Country parks, nature reserves and woodland car parks
Before we dig in Bexley
In Bexley, work on adopted pavements and verges needs consent from Bexley Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
If your site in Bexley is listed or inside a conservation area, check with the local planning authority (Bexley Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Verges on rural lanes and estates often carry water mains, telecoms cables and drainage, so services are checked before augering. Tree roots are common along verges and parks, and digging close to mature trees can harm them, so positions are adjusted to stay outside root areas where possible.
- Fit reflective bands or white tops where posts stand beside roads or in unlit car parks.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
Installation, step by step
Set out the line
Posts are set out at spacings that stop cars passing between them while leaving gaps for walkers, buggies and wheelchairs.
Dig the holes
Holes are dug by hand or auger to the required depth, avoiding roots and checking for services along verges and footpaths.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Specification choices
| Option | Detail |
|---|---|
| Removable and lockable posts | Timber posts in steel sockets, or hinged timber posts, for maintenance and emergency access. |
| Tropical hardwood | Very dense and long-lasting in ground contact. Specify certified sustainable sources. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
What affects the quote
When we price timber bollards in Bexley, these make the biggest difference:
- Fixing method: stone, concrete or steel shoe
- Post size and length
- Ground conditions, roots and services
After installation
Timber naturally moves, checks and splits along its length as it dries; surface cracks in oak and hardwood are normal and rarely affect strength. New oak can release tannin that stains nearby paving for the first season; this weathers away.
For damaged or loose posts in Bexley, repairs and replacements are priced in writing first.
Common questions
Can you install timber bollards anywhere in Bexley?
We cover all of Bexley (DA5, DA7, DA6, DA16, DA8 and DA17) and the rest of London. We also work in Dartford, Greenwich and Swanley.
Do I need consent for timber bollards on a public footway in Bexley?
Bexley Council is the highway authority covering Bexley's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do timber bollards cost in Bexley?
In Bexley, typically £105–£365 per post, supplied and installed, plus VAT (£125–£435 including VAT for homeowners), with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Do timber bollards stop vehicles?
They stop most drivers deliberately mounting a verge and resist low-speed knocks, especially in dense hardwood. They are not tested barriers and should not be relied on against a vehicle driven at them deliberately.
Why is my new oak bollard cracking?
Oak shrinks as it dries, and surface checks and splits are a normal part of that. They rarely affect the post's strength. Deep splits that run right through, or soft wood at the base, are a different matter.
Timber bollards in nearby towns
- Dartford (3.2 mi)
- Greenwich (4.2 mi)
- Swanley (4.6 mi)
- Barking and Dagenham (6.6 mi)
- Lewisham (6.8 mi)
- South Ockendon (6.8 mi)